EGTS

EGTS
Discusión en el foro

Cantidad de unidades

2833
En línea
7402
Total

Para que el sistema de rastreo Wialon identifique los datos de EGTS en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: EGTS
ID único: Same as for retranslating device

Indique los siguientes parámetros en el programa de configuración o en la configuración EGTS para utilizarlos en Wialon Hosting :

Puerto del servidor: 20629

En el centro de servicio Wialon se utilizan 7402 unidades EGTS — es 6.95% de la cantidad total de dispositivos Protocolo de repetidor conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
flg

additional parameters of the navigation package (EGTS_SR_POS_DATA)

vdop

Vertical dilution of precision (EGTS_SR_EXT_POS_DATA)

hdop

Horizontal dilution of precision (EGTS_SR_EXT_POS_DATA)

pdop

Position dilution of precision (EGTS_SR_EXT_POS_DATA)

sat

Satellites (EGTS_SR_EXT_POS_DATA)

ns

NS - bit flags characterizing the used navigation satellite systems. (EGTS_SR_EXT_POS_DATA)

The following (decimal) flag values are defined:

0 - system not defined; 1 - GLONASS; 2 - GPS; 4 - Galileo; 8 - Compass; 16 - Beidou; 32 - DORIS; 64 - IRNSS; 128 - QZSS

st

Current operating mode. (EGTS_SR_STATE_DATA)

List of modes:

0 "Passive"
1 "ERA"
2 "Active"
3 "Emergency call"
4 "Emergency Tracking"
5 "Testing"
6 "Car service"
7 "Download Software"

pwr_ext

MPSV - The value of the voltage of the main power source (EGTS_SR_STATE_DATA)

0.1 V
pwr_int

IBV - Internal battery voltage value (EGTS_SR_STATE_DATA)

0.1 V
bbv

BBV - Backup battery voltage value (EGTS_SR_STATE_DATA)

0.1 V
acc_x

XAAV - value of linear acceleration along the X axis (the most significant bit determines the sign, 1 indicates a negative value), in m/s2 with a resolution of 0.1 m/s2;

(EGTS_SR_ACCEL_DATA)

m/s2
acc_y

YAAV - value of linear acceleration along the Y axis (the most significant bit determines the sign, 1 indicates a negative value), in m/s2 with a resolution of 0.1 m/s2; (EGTS_SR_ACCEL_DATA)

m/s2
acc_z

ZAAV - value of linear acceleration along the Z axis (the most significant bit determines the sign, 1 indicates a negative value), in m/s2 with a resolution of 0.1 m/s2; (EGTS_SR_ACCEL_DATA)

m/s2
inputs

Inputs (EGTS_SR_ABS_DIG_SENS_DATA)

dsn#_state

Digital Sensor State. (EGTS_SR_ABS_DIG_SENS_DATA)

# is Digital Sensor Number

adc# Analog Sensor Value (EGTS_SR_ABS_AN_SENS_DATA)
counter#

CNV - the value of the readings of the counting input. (EGTS_SR_ABS_CNTR_DATA)

# is "CN" - counting input number;

lin#_state

LIS - loop input state value. (EGTS_SR_ABS_LOOPIN_DATA)

# - loop input number;

lls_err_flag

LLSEF - Liquid Level Sensor Error Flag (EGTS_SR_LIQUID_LEVEL_SENSOR)

lls_format

RDF - (Raw Data Flag) flag that determines the format of the LLSD field (EGTS_SR_LIQUID_LEVEL_SENSOR)

lls_unit

LLSVU - (Liquid Level Sensor Value Unit) bit flag that determines the units of measure for readings (EGTS_SR_LIQUID_LEVEL_SENSOR)

0 - Uncalibrated LLS reading.
1 - LLS readings as a percentage of the total tank volume;
2 - LLS readings in liters with a resolution of 0.1 liters.

module_addr

MADDR - address of the module from which data on LLS readings were received by the subscriber terminal (number of external port of subscriber terminal) (EGTS_SR_LIQUID_LEVEL_SENSOR)

lls#

LLSD (Liquid Level Sensor Data) (EGTS_SR_LIQUID_LEVEL_SENSOR)

# is LLSN - (Liquid Level Sensor Number) sensor serial number;

dpr DPR - (Doors Presented) a bit field that determines the presence of counters on the doors and the structure of the PCD field (bit 0 determines the presence of a counter on the 1st door, bit 1 on the 2nd, etc.). If the bit has a value of 1, then the counter is used; if 0, it is not used; (EGTS_SR_PASSENGERS_COUNTERS)
drl

DRL - (Doors Released) a bit field that defines the doors that opened and closed when counting passengers (for example, 00000000 - none of the doors opened, 00000001 - only the 1st door opened, 00001001 - the 1st and 4th doors opened a door); (EGTS_SR_PASSENGERS_COUNTERS)

madr

MADDR is the address of the module from which data from the passenger flow counters were received by the subscriber terminal (number of the external port of the subscriber terminal); (EGTS_SR_PASSENGERS_COUNTERS)

ipq_#

IPQ1...IPQ8 - number of entered passengers through 1 ... 8 doors; (EGTS_SR_PASSENGERS_COUNTERS)

opq_#

OPQ1...OPQ8 - the number of exiting passengers through 1 ... 8 doors; The presence or absence of the IPQ and OPQ fields is determined by the bits of the DPR field of the EGTS_SR_PASSENGERS_COUNTERS subrecord. If the bit corresponding to a particular door number in the DPR field has the value 1, then the corresponding IPQ and OPQ fields are present in the structure. If a bit in the DPR field has the value 0, then the corresponding IPQ and OPQ fields are not present in the structure. If a particular IPQ field is present, then the corresponding OPQ field is also present. (EGTS_SR_PASSENGERS_COUNTERS)

cb_moto

Engine hours read (EGTS_SR_CAN_DATA)

hours
cb_odometr

Mileage read (EGTS_SR_CAN_DATA)

km
cb_speed

Vehicle speed (EGTS_SR_CAN_DATA)

km/h
cb_odom_to

Mileage before maintenance (EGTS_SR_CAN_DATA)

km
cb_fuel_consumption

Total fuel consumption read (EGTS_SR_CAN_DATA)

liter
cb_fuel_level

Fuel level in the tank read (EGTS_SR_CAN_DATA)

%
cb_fuel_volume

Fuel level in the tank read (EGTS_SR_CAN_DATA)

liter​
cb_liquid_level

AdBLUE liquid level (EGTS_SR_CAN_DATA)

%
cb_liquid_volume

AdBLUE liquid level (EGTS_SR_CAN_DATA)

liter
cb_temp_coolant

Coolant temperature (engine temperature -40 to 210 °C) (EGTS_SR_CAN_DATA)

°C
cb_engine_rpm

Engine rpm (EGTS_SR_CAN_DATA)

rpm
cb_gas_pedal

Accelerator position 0 to 100% (EGTS_SR_CAN_DATA)

%
cb_load_engine

Engine load 0 to 125% (EGTS_SR_CAN_DATA)

%
cb_axis_weight_#

Axle load (EGTS_SR_CAN_DATA)

# is an axle number

kg
cb_guard_alarm

Crash controllers (EGTS_SR_CAN_DATA):

0 side lights
1 low beam
2 high beam
3 Driver's belt
4 Passenger belt
5 STOP
6 Oil pressure / oil level
7 Temp. cooling Jew. dvig.
8 Brake system
9 Charging the battery
10 Safety system (SRS)
11 Check the engine
12 Outdoor lighting
13 Tire pressure
14 Brake pad wear
15 Warning
16 ABS
17 Low fuel level
18ESP
19 Glow plug
20 FAPs
21 EPCs

cb_accident

Security/guard parameters (EGTS_SR_CAN_DATA):

0 ignition on
1 key is in the ignition
2 dynamic ignition on 2
3 the engine is running (information is available only when the ignition is on)
4 standard alarm is in alarm mode
5 driver's door open
6 passenger door open
7 trunk open
8 open hood
9 the handbrake lever is tightened (information is available only when the ignition is on)
10 foot brake applied (information is only available when the ignition is on)
11 Webasto enabled
12 the car is locked with the standard key fob
13 the car is opened using the standard key fob
14 the trunk is opened using the standard key fob
15 the module sent an arming/disarming signal to the alarm

cb_machinery

Condition of agricultural machinery (EGTS_SR_CAN_DATA):

0 ignition on
1 Handbrake applied (information available only when the ignition is on)
2 Low fuel level
3 high beam
4 Turning on the header
5 Ejection of grain from the bunker

cb_bk_vulkan

Parameters from the on-board computer "VulKan" (EGTS_SR_CAN_DATA):

0 Discarded concave state
1 grain tank entrance open
2 grain hopper 100%
3 grain hopper 70%
4 the drain filter of the hydraulic system of the power cylinders is clogged
5 the pressure filter of the hydraulic system of the power cylinders is clogged
6 oil level in the oil tank
7 the pressure filter of the brake hydraulic system is clogged
8 oil filter clogged
9 fuel filter clogged
10 presence of water in fuel
11 clogged air filter
12 engine oil temperature
13 emergency oil temperature in the hydraulic system of power cylinders
14 emergency oil pressure in the engine
15 emergency engine coolant level
16 overflow section of the hydroblock
17 the drive of the unloading auger is switched on with the unloading pipe folded
18 no operator
19 clogged straw walker
20 cleaning fan control off
21 disable threshing drum control

cb_reaper_hours

harvest time (EGTS_SR_CAN_DATA)

cb_harvested_area

Harvested area (EGTS_SR_CAN_DATA)

cb_productivity

Performance (EGTS_SR_CAN_DATA)

cb_harvest_amount Harvested quantity (EGTS_SR_CAN_DATA) tons
cb_grain_moisture

Grain moisture content (EGTS_SR_CAN_DATA)

%
cb_threshing_drum_rpm

Threshing drum rpm (EGTS_SR_CAN_DATA)

rpm
cb_out_concave_clrnc

Outlet concave clearance (EGTS_SR_CAN_DATA)

ida

IDA (Identity Device Address) – reader network address or reader number specified by the block. (EGTS_SR_IDENTITY_DATA)

icn

ICN (Identity Card Number) – the value of the serial number of the card, the length is determined by the length of the serial number, the upper unused bits are filled with zeros. (EGTS_SR_IDENTITY_DATA)

avl_driver_id

ICN (Identity Card Number) – the value of the serial number of the card, the length is determined by the length of the serial number, the upper unused bits are filled with zeros. (EGTS_SR_IDENTITY_DATA)

temp_#

TS1…N (Temperature Sensor) – Value from temperature sensors in degrees Celsius. (EGTS_SR_TRMO_DATA)

°C
refr_type

REFR_TYPE (Refrigerator Model) – refrigerator model (type). The refrigerator model is selected when configuring the terminal (locally or remotely). (EGTS_SR_THERMO_DATA)

TKDL-PRO - 0
TouchPrint - 1
DataCold - 2
TKDL-SPR - 3
ThermoKing SLX (via IQFREEZE) - 4
Carrier STD32 (via IQFREEZE) - 5
Zanotti (via IQFREEZE) - 6
Thermal Master (via IQFREEZE) - 7
Carrier NDP33LN6FB (via IQFREEZE) - 8

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono