Queclink GL300

Cantidad de unidades

322
En línea
1479
Total
Características Queclink GL300:
  • Caja negra
  • Soporta GLONASS
Soportado en Wialon:
  • Gestión remota vía GPRS
  • LBS
  • Gestión remota vía SMS
  • Comunicación vía TCP
  • Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de Queclink GL300 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: Queclink GL300
ID único: imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Queclink GL300 para utilizarlos en Wialon Hosting :

Puerto del servidor: 20706

En el centro de servicio Wialon se utilizan 1479 unidades Queclink GL300 — es 6.2% de la cantidad total de dispositivos Personal conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
battery Battery level %
ber The quality of GSM signal
charger

Whether the battery is charging when the external power supply is connected:
0: Not charging
1: Charging

charging

Whether the battery is charging when the external power supply is connected:
0: Not charging
1: Charging

external_pwr

External power supply:
0: Not connected
1: Connected

flash_type

A numeric to indicate what the type of flash is:
0: SST flash
1: NMX flash

gps_antenna_type

A numeric to indicate which GPS antenna is working now
0: inside GPS antenna

gps_on_need

Whether to close GPS chip after retrieving GPS position information:
0: Never close GPS chip
1: Close GPS chip after retrieving GPS information every time
2: Never close GPS chip only in ignition on state or movement state
3: Never open GPS chip

gsm_level The GSM signal strength level
gsm_quality The quality of GSM signal
hdop Horizontal Dilution of Precision
ign Ignition state: 0: off, 1: on
ign_off_duration Duration since last time the ignition is off s
ign_on_duration Duration since last time the ignition is on s
led_on The working mode of LEDs
mileage The total mileage km
movement_cause

The enter movement cause defines the factor who triggers the message:
0: Triggered by motion sensor detection. It is defaulted
1: Triggered by RTO sub command RTL
2: Triggered by the command GTLSW from EBK

movement_state

0: The state of the device changed from motion to rest
1: The state of the device changed from rest to motion

odo_mileage The total mileage in the position km
pwr_int Battery voltage V
report_type Message type
rssi The GSM signal strength level
state

The current motion state of the device:
21: The device attached vehicle is ignition on and motionless
22: The device attached vehicle is ignition on and moving
41: The device is motionless without ignition on
42: The device is moving without ignition on

temp_int The temperature of the device °C
geo_mode The new mode of Geo-Fence
geo_radius The radius of Geo-Fence m
geo_ch_int The check interval of Geo-Fence sec
geo_active

Indicate active or deactive Geo-Fence:
0 - Deactivate Geo-Fence
1 - Activate Geo-Fence

Queclink GL300N and GL300W should be configured like Queclink GL300.

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono