Xexun TK103-2

Xexun TK103-2
Fabricante: Xexun
Rating del usuario

(125 Votos)

Discusión en el foro

Cantidad de unidades

451
En línea
672
Total

Para que el sistema de rastreo Wialon identifique los datos de Xexun TK103-2 en el diálogo de configuración de la unidad, indique los siguientes datos:

Tipo de dispositivo: Xexun TK103-2
ID único: imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Xexun TK103-2 para utilizarlos en Wialon Hosting:

Dirección IP del servidor: 193.193.165.165
Puerto del servidor: 20462

En el centro de servicio Wialon se utilizan 672 unidades Xexun TK103-2 — es 0.13% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
ac_alarm Acceleration alarm
acc_alarm Acceleration alarm
battery Battery charge level %
door_alarm Door alarm
door Door alarm
event Event that initiated the message
fortify Fortification alarm
fuel_level Fuel level %
help_me SOS button pressed
ign Ignition on/off
ignition Ignition on/off
low_battery Low battery alarm
move_alarm Movement alarm
over_speed Over speed alarm
param_1 Additional param 1 value
param_2 Additional param 2 value
power_fail External power failure
pwr_int Internal battery voltage Volt
rfid RFID
shake Shake alarm
temp Temperature °C
trigger Trigger alarm


In order to configure the object, you have to follow these steps by sending SMS commands to the tracker:

  • "begin123456" - resets all controller's settings, password 123456 is set by default
  • make a call to the controller, which should wait untill two beeps, break the call and send SMS with it's coordinates
  • "apn123456 mts" - sets the required apn for gprs configuration
  • "apnuser123456 mts" - sets the user for gprs configuration
  • "apnpasswd123456 mts" - sets the password for gprs configuration. For new equipment versions user and password are set with one command "admin123456 mts mts"
  • "GPRS123456" - we're setting GPRS mode
  • "adminip123456 <IP> 20462" - sets the server's address for packages sending, <IP> replace for IP of monitoring system
  • "t030s***n123456" - sets the interval of messages sending to 30 seconds. For new equipment versions this command can have the following format "fix030s***n123456"

You can also download an example of object configuration file for Xexun TK103-2 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.

Otros dispositivos del fabricante