Ulbotech T361

Ulbotech T361
Fabricante: Ulbotech
Rating del usuario

(0 Votos)

Discusión en el foro

Cantidad de unidades

28
En línea
78
Total

Para que el sistema de rastreo Wialon identifique los datos de Ulbotech T361 en el diálogo de configuración de la unidad, indique los siguientes datos:

Tipo de dispositivo: Ulbotech T361
ID único: imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Ulbotech T361 para utilizarlos en Wialon Hosting:

Dirección IP del servidor: 193.193.165.165
Puerto del servidor: 21016

En el centro de servicio Wialon se utilizan 78 unidades Ulbotech T361 — es 0.02% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
adc0 External power supply voltage V
adc1 Device temperature °C
adc2 Device backup battery voltage V
adc3 Analog input voltage (connect to device IO port) V
alarm Alarm triggered. Each bit relate to one alarm status of the device:
Bit0: External Power off alarm
Bit1: Motion alarm
Bit2: Over speed alarm
Bit3: Jamming alarm
Bit4: Geo-fence alarm
Bit5: Towing alarm
Bit6: Input low alarm
Bit10: Panic button alarm (SOS)
Bit11: OBD alarm
Bit14: Accident alarm
Bit15: Power low alarm
cell_id ID of Base transceiver station (BTS) or sector of a BTS within a Location area code (LAC)
device_status Device status. Each bit relate to one status of the device:
Bit0: Powered with external/internal power
Bit1: Move/stop
Bit2: Over speed status
Bit3: Jamming status
Bit4: Geo-fence alarm status
Bit5: Immobilize status
Bit6: ACC status
Bit7: Input level low/high
Bit8: Input level middle
Bit9: Engine status
Bit10: Panic button status
Bit11: OBDII alarm status
Bit12: Angle rapid change alert
Bit13: Speed rapid change alert
Bit14: Domestic roaming (judged by MNC)
Bit15: International roaming (judged by MCC)
fuel_volume Fuel consumption Liter
geo_alarm Geo-fence alarm status. Each bit represents one geo-fence, bit0 represents geo-fence1, bit4 represents geo-fence5
. Bit definition:
0: no alarm triggered in this fence
1: alarm triggered in this fence
geo_status Geo-fence in/out status. Each bit represents one geo-fence, bit0 represents geo-fence1, bit4 represents geo-fence5
. Bit definition:
0: device out the fence or no fence is set in this bit
1: device is inside of the fence
gps_status 2D/3D locating mark:
1: 3D location data
0: 2D location data
gsm_signal GSM signal strenth -dbm
hdb Harsh driver behavior data. Each bit relate to one status of the hash driver behavior:
Bit0: Rapid Acceleration
Bit1: Rough Braking
Bit2: Harsh course
Bit3: No warm up
Bit4: Long idle
Bit5: Fatigue driving
Bit6: Rough terrain
Bit7: High RPM
hdop HDOP (Horizontal Dilution of Precision)
lac Local Area Code
mcc Mobile Country Code
mileage Mileage m
mnc Mobile Network Code
sN_pidM Value of OBDII PID M of server N
vin Vehicle identification number

Otros dispositivos del fabricante