Queclink GV55S

Queclink GV55S
Discusión en el foro

Cantidad de unidades

0
En línea
1
Total

Para que el sistema de rastreo Wialon identifique los datos de Queclink GV55S en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: Queclink GV55S
ID único: imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Queclink GV55S para utilizarlos en Wialon Hosting :

Puerto del servidor: 22071

En el centro de servicio Wialon se utilizan 1 unidades Queclink GV55S — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
report_type

Report Type

rep_id

Report ID

rep_type

Report type (GT###)

mcc

Mobile country code

mnc

Mobile network code

lac

Location area code in hex format

cell_id Cell ID in hex format
mileage

The current total mileage

hour_meter_count

Hour Meter Count

h
h_m_count

Hour Meter Count

h
battery

Backup Battery Percentage

%
ign

Ignition status

motion_state

Device status

  • 16 (Tow): The device attached vehicle is ignition off and it is towed.
  • 1A (Fake Tow): The device attached vehicle is ignition off and it might be towed.
  • 11 (Ignition Off Rest): The device attached vehicle is ignition off and it is motionless.
  • 12 (Ignition Off Motion): The device attached vehicle is ignition off and it is moving before it is treated as being towed.
  • 21 (Ignition On Rest): The device attached vehicle is ignition on and it is motion less
  • 22 (Ignition On Motion): The device attached vehicle is ignition on and it is moving
  • 41 (Sensor Rest): The device attached vehicle is motionless without ignition signal detected
  • 42 (Sensor Motion): The device attached vehicle is moving without ignition signal detected

pwr_ext External Power Voltage
iccid

ICCID

csq_rssi
  • GSM signal level of the terminal
gsm

GSM signal level of the terminal

csq_ber

The quality of the GSM signal. The range is 0-7, 99 for unknown.

bat_status

Whether the external power supply is connected.

  • 0: Not connected
  • 1: Connected

charging

Whether the backup battery is charging when the main power supply is connected.

  • 0: Not charging
  • 1: Charging

led_on

Indicate whether the LED’s are turned on:

  • 0: Off
  • 1:On

din_status

A bitwise hex integer to represents the logical status of the digital input. From the lowest bit to the highest bit, each bit represents ignition detection and one of the digital inputs 1 respectively. For each bit, 0 means disable status, 1 means enable status.

dout_status

A bitwise hex integer to represents the logical status of the digital output. From the lowest bit to the highest bit, each bit represents one of the digital outputs 1 – 2 respectively. For each bit, 0 means disable status, 1 means enable status

time_zone The time offset of the local time zone to the UTC time. m
daylight_saving

The current setting of the daylight saving.

  • 0: Daylight saving is disabled
  • 1: Daylight saving is enabled

data_type

The data reported to backend server is recorded before or after crash.

  • 0: before crash.
  • 1: after crash.

frames_count

Total number of messages that are sent to the bckend server for the crash event.

frame

A numeric to indicate the sequence of the current message.

x_axis#

X axis acceleration data

y_axis#

Y axis acceleration data

z_axis#

Z axis acceleration data

ign_off_duration

Duration of Ignition Off

s
ign_on_duration

Duration of Ignition On

s
state

The current motion state when the vehicle leaves idling status.

idle_dt

The time that the vehicle has been in idling status.

s
gps_signal_status

GPS Signal Status:

  • 0 means lost GPS signal or no successful GPS fix,
  • 1 means GPS signal recovered and successful GPS fix.

sats

Satellite Number

wave1_out_id

ID of the output With wave shape 1

wave1_out_active

The output status with wave shape 1

roaming_state

Roam state :

  • 0 Home
  • 1 Known Roaming
  • 2 Unknow Roaming
  • 3 Blocking Report

jamming_status

The current Jamming status of the device.

  • 1: Quit the jamming.
  • 2: Enter the jamming.

jamming_cw Continuous wave(narrowband) jamming detection threshold dB
jamming_gps

Broadband jamming detection threshold

dB
is_pwr_ext

External Power Supply

mcu_ver

MCU Version

hw_ver

Hardware Version

fw_ver Firmware Version

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono