MVT600

MVT600
Fabricante: Meitrack
Rating del usuario

(5 Votos)

Cantidad de unidades

1364
En línea
2033
Total

Para que el sistema de rastreo Wialon identifique los datos de MVT600 en el diálogo de configuración de la unidad, indique los siguientes datos:

Tipo de dispositivo: MVT600
ID único: imei

Indique los siguientes parámetros en el programa de configuración o en la configuración MVT600 para utilizarlos en Wialon Hosting:

Dirección IP del servidor: 193.193.165.165
Puerto del servidor: 20259

En el centro de servicio Wialon se utilizan 2033 unidades MVT600 — es 0.36% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
text "err_flag" value of this parameters means reply on command for LED display:
00 - OK
02 — CRC verification error
03 — Unknown command string
04 — The update file length is inconsistent.
05 — The factory logo of the update file is inconsistent.
06 — Update state exited.
07 — The LED display is not connected.
08 — The update file package and request package are inconsistent.
09 — Update timeout
10 — Flash update error
15 — The serial port data length is inconsistent.
16 — Try to delete information that does not exist.

Note: It is possible to get photos from your camera.

To send a message to the LED display you need to create a command of type "custom_msg" and use the following command text:

send_led_msg,1|0|00:00:00|0|0|000101000000,Hello

Where:

send_led_msg - prefix for LED display message;

, - separator

1|0|00:00:00|0|0|000101000000 - parameters ( | - separator for parameters):

1) Playing level:

0: normal. Instant information will be played after the existing information playing is finished.
1: urgent. Interrupt the existing information playing, and play instant information immediately.
2) How to exit instant state
0: By exit command
1: By instant end time
2: By instant playing time
3: By number of instant cycle times

4: By scheduled playing

3) Instant end time or life cycle: If the instant state exits by 1, the parameter is End
Time; if the instant state exits by 4, the parameter is Life Cycle.

4) Instant playing time: The unit is second.

5) Number of instant cycle times

6) Parameter displayed PPPPPP:

First P: font. 00 – thin font. 01 – bold font.

Second P: 01 (default)

Third P: action. Move left: 01; Move up: 03; Move down: 04; Retain: 05.

Fourth P: speed. 00: 10 bytes/s; 01: 8 bytes/s; 02: 5 bytes/s; 03: 4 bytes/s; 04: 2 bytes/s.

Fifth P: stop time. 00. Unit: second.

Sixth P: stop mode. 00: paging stop; 01: last page stop.

, - separator

Hello - message text.

Note: Before sending new message to the LED display you need to send command of type "custom_msg" and use the command text "delete_led_msg" if you chose "How to exit instant state by exit command"

Otros dispositivos del fabricante

Noticias