FindMe F3

FindMe F3
Discusión en el foro

Cantidad de unidades

0
En línea
0
Total
Características FindMe F3:
  • Caja negra
  • Dual SIM
  • Soporta GLONASS
Soportado en Wialon:
  • Acelerómetro
  • Gestión remota vía GPRS
  • LBS
  • Gestión remota vía SMS
  • Comunicación vía TCP

Para que el sistema de rastreo Wialon identifique los datos de FindMe F3 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: FindMe F3
ID único: imei

Indique los siguientes parámetros en el programa de configuración o en la configuración FindMe F3 para utilizarlos en Wialon Hosting :

Puerto del servidor: 21632

En el centro de servicio Wialon se utilizan 0 unidades FindMe F3 — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
fwere_curr_vers The current firmware version
fwere_flag

Flag of the firmware change result:
0 – manufacturer's firmware
1 – firmware changed by command from the server
2 – firmware changed by command from the device

gsm_level CSQ - GSM level
hdop

HDOP:
1 - Perfect
2-3 - Great
4-6 - Good
7-8 - Medium
9-20 - Below average
>20 - Bad

pwr_ext The voltage of the externalpower. mV
reload_flag Flag of the device reboot reason
scid1 SCID SIM-card №1
scid2 SCID SIM-card №2
work_type

Device working mode:
0 – base mode
1 – power saving mode 1
2 – power saving mode 2
3 – power saving mode 3 (deep sleep)

flag

Device status flag (bitwise parameter):
bit1 - (SIM): 0 – work on SIM1, 1 – work on SIM2
bit2 - (GPS): 0 – work on an external GPS antenna, 1 – on internal
bit3 - (GSM): 0 – work on an external GSM antenna, 1 – on internal
bit4 - (Accelerometer): 1 – there is movement on the accelerometer, 0 – there is no movement
bit5 - (Energy saving): 0 – normal mode, 1 – power saving mode
bit6 - (Energy saving): 1 – sleep mode
bit5 and bit6 - (Energy saving): 1 – deep sleep mode
bit7 (Coordinates validity): 0 – valid, 1 – not valid

valid

Coordinates validity:
0 - valid
1 - not valid

fwere_base_vers The base firmware version
relod_flag Reboot reason flag
fwere_base_new Base firmware version
fwere_curr_new Current firmware version
acc_temp Temperature in the device °C
temp_gsm GSM module temperature °C
mcc Mobile country code
mnc Mobile network code
ta Timing Advance
lac Location area code
cell_id Cell ID
rx_level RX level

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono