ToTarget GPS-ELOCK

ToTarget GPS-ELOCK
Fabricante: Totarget
Discusión en el foro

Cantidad de unidades

0
En línea
6
Total
Características ToTarget GPS-ELOCK:
  • E-seal
Soportado en Wialon:
  • Gestión remota vía GPRS
  • Gestión remota vía SMS
  • Comunicación vía TCP

Para que el sistema de rastreo Wialon identifique los datos de ToTarget GPS-ELOCK en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: ToTarget GPS-ELOCK
ID único: serial

Indique los siguientes parámetros en el programa de configuración o en la configuración ToTarget GPS-ELOCK para utilizarlos en Wialon Hosting :

Puerto del servidor: 21691

En el centro de servicio Wialon se utilizan 6 unidades ToTarget GPS-ELOCK — es 0% de la cantidad total de dispositivos Rastreador de activos conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
drvr_num Driver number
loc_st

Location status:

  • 0 - Invalid location
  • 2 - 2D location
  • 3 - 3D location

ant_st

GPS antenna status:

  • 0 - Antenna is good
  • 1 - Antenna is broken
  • 2 - Antenna short
  • 3 - Mismatch antenna

mileage Cumulative mileage km
veh_st

Vehicle status:

  • bit4 - Loaded
  • bit9 - No GPRS network
  • bit13 - Weak network signal
  • bit16 - Only by SMS
  • bit17 - Need encryption by PIN code
  • bit18 - GPS shutdown status
  • bit20 - Lock rod opened
  • bit21 - Lock rod broken
  • bit22 - Lock shell opened

alarm_st

Alarm status:

  • bit0 - Rob alarm
  • bit1 - Steal alarm
  • bit2 - Lock rod opened alarm
  • bit3 - Low Battery alarm
  • bit4 - Shell opened alarm
  • bit5 - Lock rod broken alarm
  • bit7 - Lock motor close
  • bit9 - Over-speed alarm
  • bit10 - GPS antenna failure alarm
  • bit11 - GPS module failure alarm

lac Location Area Code
cell_id Cell ID
mcc Mobile country code
mnc Mobile network code
rx_lvl Signal strength
func_code

Function code:

  • 1 - Call response
  • 2 - GPS data with base station information
  • 3 - GPS data at regular time
  • 6 - Single data compensation upload in GPRS blind area
  • 7 - Multi base station data
  • 9 - GPS data with base station information and cumulative time
  • 22 - Instruction return code
  • 45 - Upload message of Terminal

lock_st E-Lock status
rec_f_code Received function code
inst_code Instruction code
op_instr

Operation instruction.
85 - operation reply.

cmd_code Command code
cmdsrc

Command source:

  • 0 - SMS,
  • 1 - automatic
  • 2 - keyboard
  • 3 - handset,
  • 4 - center,
  • 5 - gate

voltage_st

Voltaget status:

  • 48 - Serious low voltage
  • 49 - Too low voltage
  • 50 - Low voltage
  • 51-54 - Normal voltage
  • 55 - Full

If your device has 4-digits port in the configurator please enter 9010 port.

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono