Kingwo LT12

Kingwo LT12
Fabricante: Kingwo
Discusión en el foro

Cantidad de unidades

27
En línea
794
Total
Características Kingwo LT12:
  • 4G/LTE
  • Caja negra
  • Posicionamiento Wi-Fi
Soportado en Wialon:
  • Gestión remota vía GPRS
  • LBS
  • Comunicación vía TCP

Para que el sistema de rastreo Wialon identifique los datos de Kingwo LT12 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: Kingwo LT12
ID único: serial

Indique los siguientes parámetros en el programa de configuración o en la configuración Kingwo LT12 para utilizarlos en Wialon Hosting :

Puerto del servidor: 22158

En el centro de servicio Wialon se utilizan 794 unidades Kingwo LT12 — es 0.46% de la cantidad total de dispositivos Rastreador de activos conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
stN

Status of byte N.
st0:

  • bit1 - Lock. Applicable to MT01/MT02S
  • bit2 - GPS module error

st1:

  • bit0 - acc on

st2 & st3 & st4 are reserved

alN

Alarm of byte N.
al0:

  • bit2 - vibration alarm. Applicable to MT01/MT02S
  • bit3 - movement alarm. Applicable to MT01/MT02S

al1:

  • bit2 - speeding alarm. Applicable to the wired terminals

al3:

  • bit1 - cable cut off alarm. Applicable to MT01/MT02S
  • bit2 - low voltage alarm of the main power. Applicable to the wired terminals

al2 & al4 are reserved

mileage Mileage km
pwr_ext Main power voltage V
speed_sens Additional info about speed nmi/h
gsm GSM signal strength
al_expN

Additional info about extended status:
al_exp0:

  • bit0 - blind area compensation data
  • bit1 - in sleep mode. Applicable to wired terminals
  • bit2 - removal status. Applicable to wireless terminals
  • bit3 - RTC Error. Applicable to wireless terminals

al_exp1:

  • bit0 - track mode. Applicable to wireless terminals
  • bit1 - G-sensor error. Applicable to wired terminals
  • bit2 - Improper installation, anti-removal button or light sensor terminal installation error. Applicable to wireless terminals

al_exp2:

  • bit1bit0 - 01 - power off restart. 11 - software reset. 00 - other reset

al_exp3:

  • bit0 - communication interrupted
  • bit3 - WIFI module error. Applicable to wireless WIFI terminal

al_exp4 is reserved

mcc Mobile country code
mnc Mobile network code
lac Location area code
cell_id Cell ID
blind_area

Blind area data

  • bit0 - Network register failure
  • bit1 - PDP activation context failed
  • bit2 - IP error. Unable to connect to the server
  • bit3 - domain name error. Unable to connect to the server
  • bit9 - module error
  • bit10 - SIM card error
  • bit11 - device ID error
  • bit16 - upgrading. Applicable to the wired terminals
  • bit24 - communication interrupted
  • bit25 - no signal

term_params Terminal parameters
bat_lvl Remaining battery capacity percentage %
network_type

Network type:

00:unknown

01:GSM

02:WCDMA

03:TDSCDMA

04:LTE

05:CAT-M1 (eMTC)

06:NBioT

07:CDMA

08:EVDO

run_time

System running time

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre y apellido*
Compañía*
Email*
Teléfono