SmartWitness KP1

SmartWitness KP1
Manufacturer: SmartWitness
Forum Discussion
Discontinued

Number of units

1
Online
42
Total
Features SmartWitness KP1:
  • 3G
Supported in Wialon:
  • Camera connection
  • Remote management via GPRS
  • Driver identification
  • Digital sensors
  • Alarm button
  • Communication via TCP

The following data should also be added to SmartWitness KP1 unit properties section of Wialon GPS tracking software :

Device type: SmartWitness KP1
Unique ID: DRID

Specify the following parameters in configuration software or configuration SmartWitness KP1 for use in Wialon Hosting :

Server port: 20910

42 units of SmartWitness KP1 device type are connected to Wialon Data Center. This represents 0.26% of all Video monitoring connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
vehicle_id Vehicle Number
ID/avl_driver Driver ID from SD Card, RFID Card, etc.
phone_number Usim phone number
valid GPS validity. Valid: 1, Invalid: 0
pulse_speed Pulse Speed, km/h
rpm Revolutions per minutes
signal Bitflag:
Bit4 - Engine(Ignition): 0(On), 1(Off)
Bit3 - Reverse status
Bit2 - Brake status
Bit1 - Right status
Bit0 - Left status
alarm_in Bitflag Alarm In status. AlarmIn8(bit7) - AlarmIn1(bit0)
alarm_out Bitflag Alarm Out status. AlarmOut2(bit1), AlarmOut1(bit0)
record 0: not recording, 1: recording
error_media BitFlag:
Bit0 - error in SD1
Bit1 - error in SD2
Bit4 - error in HDD1
Bit5 - error in HDD2
cam_signal Bitflag camera signal valid. Cam8(bit7) ~ Cam1(bit0)
rec_model Recorder Model:
1 - DVR 4CH/DVR 8CH
2 - KP1
rec_fw Recorder FW
rec_power_type Recorder Power Type:
1 - DEVPOWER_CIGAR
2 - DEVPOWER_ADAPTER
3 - DEVPOWER_JUNCTIONBOX
4 - DEVPOWER_ADAPTER2 (INT1-S)
rec_cam Bitflag camera enable info. Cam8(bit7) - Cam1(bit0)
das_key DASKey
x_gsensor GSENSOR, X-axis (-2000 ~ 2000, mG) mG
y_gsensor GSENSOR, Y-axis (-2000 ~ 2000, mG) mG
z_gsensor GSENSOR, Z-axis (-2000 ~ 2000, mG) mG
event_type Event Type Bit Flags:
Bit0 - DEVENT_MOTION
Bit1 - DEVENT_ALARMIN
Bit2 - DEVENT_SIGNAL
Bit3 - DEVENT_GS_TURN
Bit4 - DEVENT_GS_ACCEL
Bit5 - DEVENT_GS_BRAKE
Bit6 - DEVENT_GS_SHOCK
Bit7 - DEVENT_GS_ETC
Bit8 - DEVENT_SPEED
Bit9 - DEVENT_NVS
Bit10 - DEVENT_PBUTTON
Bit11 - DEVENT_PARKINGMODE
Bit12 - DEVENT_RPM
Bit13 - DEVENT_IDLING
Bit14 - DEVENT_SYSWARNING
Bit16 - DEVENT_GEOFENCE
Bit17 - DEVENT_SERVERFORCE
Bit28 - DEVENT_DEMO

motion_channel Camera Number. BitFlags:
Bit0 - Camera 1
Bit1 - Camera 2
Bit2 - Camera 3
etc.
alarm_in_channel Alarm In Number. BitFlags:
Bit0 - Alarm 1
Bit1 - Alarm 2
Bit2 - Alarm 3
etc.
signal_channel Signal Number. BitFlags:
Bit0 - Signal 1
Bit1 - Signal 2
Bit2 - Signal 3
etc.

nvs_channel Camera Number. BitFlags:
Bit0 - Camera 1
Bit1 - Camera 2
Bit2 - Camera 3
etc.

How to set up KP1 in Wialon

Allows for immediate event-based data transfer. Video file (up to 20 sec) request from the device internal storage is also available.

More devices from the manufacturer

Contact Gurtam and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone