GPS tracker Queclink GL501 LTE | Integrated with Wialon

The following data should also be added to Queclink GL501 LTE unit properties section of Wialon GPS tracking software :

Device type:	Queclink GL501 LTE
Unique ID:	imei

Specify the following parameters in configuration software or configuration Queclink GL501 LTE for use in Wialon Hosting :

Server port:

21948

70 units of Queclink GL501 LTE device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
battery	Current volume of the battery	%
active_mode	Current mode of the device: 0: Power saving mode 1: Continuous nide
movement_status	the movement status of the device 0: Stillness 1: Motion
temp_int	The real time temperature value of the terminal	°С
evt_state1	The light sensor tamper state 0: Normal state 1: Tamper alarm state
iccid	The ICCID of the installed SIM card
csq_rssi	The network signal strength leveel
csq_ber	The quality of the network signal
bt[bt_index]_mask	Bitwise mask to configue which data item is reported bit 0: Bluetooth accessory name bit 1: Bluetooth accessory MAC bit 2: Bluetooth accessory connection status: 1 - connected \| 0 - disconnected bit 3: Bluetooth accessory battery voltage bit 4: Bluetooth accessory temperature bit 5: Bluetooth accessory humidity
bt_num	The number of bluetooth accessory. If it is 0, the accessory details fields from bt_index to bt[bt_index]_hum will not display. I
bt_index	The index of bluetooth accessory. Takes values 0-9
bt[bt_index]_type	The type of the bluetooth accessory. Possible types: 0: No Bluetooth accessory. 6: Beacon temperature/humidity sensor.
bt[bt_index]_raw_data	The data is read from Bluetooth accessory
bt[bt_index]_hum	The humidity data of Bluetooth accessory
bt[bt_index]_temp	The Temperature data of the Bluetooth accessory
bt[bt_index]_bat_level	The battery level of Bluetooth accessory	%
bt[bt_index]_alarm	The alarm type of the bluetooth accessory: 0: The voltage of the Bluetooth accessory is low 1: The temperature alarm: Current temperature value is below low temperature limit 2: The temperature alarm: Current temperature value is upper high temperature limit 3: The temperature alarm: Current temperature value is within the range defined by temperature limit 7: Humidity alarm: Current Humidity value is below low humidity limit 8: Humidity alarm: Current Humidity valueis upper high humidity limit 9: Humidity alarm: Current Humidity values is within the range defined by humidity limit A: The available alarm: The connection status of Bluetooth accessory has changed

Parameter name

Description

Units

battery

Current volume of the battery

active_mode

Current mode of the device:

0: Power saving mode

1: Continuous nide

movement_status

the movement status of the device

0: Stillness

1: Motion

temp_int

The real time temperature value of the terminal

°С

evt_state1

The light sensor tamper state

0: Normal state

1: Tamper alarm state

iccid

The ICCID of the installed SIM card

csq_rssi

The network signal strength leveel

csq_ber

The quality of the network signal

bt[bt_index]_mask

Bitwise mask to configue which data item is reported

bit 0: Bluetooth accessory name

bit 1: Bluetooth accessory MAC

bit 2: Bluetooth accessory connection status: 1 - connected | 0 - disconnected

bit 3: Bluetooth accessory battery voltage

bit 4: Bluetooth accessory temperature

bit 5: Bluetooth accessory humidity

bt_num

The number of bluetooth accessory. If it is 0, the accessory
details fields from bt_index to bt[bt_index]_hum will not display. I

bt_index

The index of bluetooth accessory. Takes values 0-9

bt[bt_index]_type

The type of the bluetooth accessory. Possible types:

0: No Bluetooth accessory.
6: Beacon temperature/humidity sensor.

bt[bt_index]_raw_data

The data is read from Bluetooth accessory

bt[bt_index]_hum

The humidity data of Bluetooth accessory

bt[bt_index]_temp

The Temperature data of the Bluetooth accessory

bt[bt_index]_bat_level

The battery level of Bluetooth accessory

bt[bt_index]_alarm

The alarm type of the bluetooth accessory:

0: The voltage of the Bluetooth accessory is low

1: The temperature alarm: Current temperature value is below low temperature limit

2: The temperature alarm: Current temperature value is upper high temperature limit

3: The temperature alarm: Current temperature value is within the range defined by temperature limit

7: Humidity alarm: Current Humidity value is below low humidity limit

8: Humidity alarm: Current Humidity valueis upper high humidity limit

9: Humidity alarm: Current Humidity values is within the range defined by humidity limit

A: The available alarm: The connection status of Bluetooth accessory has changed

Fill out a request form to get started with Wialon

Products

Niche products for addressing specific tasks

Queclink GL501 LTE

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Become a partner

Request Wialon in your region

Fill out a request form to get started with Wialon