Eelink TK418

Eelink TK418
Forum Discussion

Number of units

1080
Online
1547
Total
Features Eelink TK418:
  • 4G/LTE
  • Blackbox
  • GLONASS support

The following data should also be added to Eelink TK418 unit properties section of Wialon GPS tracking software :

Device type: Eelink TK418
Unique ID: imei

Specify the following parameters in configuration software or configuration Eelink TK418 for use in Wialon Hosting :

Server port: 22015

1547 units of Eelink TK418 device type are connected to Wialon Data Center. This represents 0.07% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
report_type

1 - ACC On

2 - ACC Off

3 - DINx changed

mcc Mobile country code
mnc Mobile network code
lac Location area code
cell_id Cell tower ID
dev_status

Bit 0

1: GPS is fixed

0: GPS is not fixed

Bit 1

1: Device is designed for car

0: Device is not designed for car

Bit 2

1: Car engine is fired (only valid when bit 1 is 1)

0: Car engine is not fired

Bit 3

1: Accelerometer is supported

0: No accelerometer

Bit 4

1: The motion-warning is activated (only valid when bit 3 is 1)

0: The motion-warning is deactivated

Bit 5

1: Relay control is supported

0: No relay control

Bit 6

1: The relay control is triggered (only valid when bit 5 is 1)

0: The relay control is not triggered

Bit 7

1: External charging is supported

0: No external charging

Bit 8

1: Device is charging (only valid when bit 7 is 1)

0: Device is not charging

Bit 9

1: Device is active (only valid when bit 3 is 1)

0: Device is stationary

Bit 10

1: GPS module is running

0: GPS module is not running

Bit 11

1: OBD module is running (only valid when OBD is

supported)

0: OBD module is not running

Bit 12

1: DIN0 is high level (only valid when DIN0 is supported)

0: DIN0 is low level

Bit 13

1: DIN1 is high level (only valid when DIN1 is supported)

0: DIN1 is low level

Bit 14

1: DIN2 is high level (only valid when DIN2 is supported)

0: DIN2 is low level

Bit 15

1: DIN3 is high level (only valid when DIN3 is supported)

0: DIN3 is low level

pwr_int

Battery voltage

mV
ain0

AIN0 value

mV
ain1

AIN1 value

mV
mileage

Device mileage

m
gsm_counter

GSM counter from last GSM command

min
gps_counter

GPS counter from last GPS command

min
pdm_step

Accumulated steps today

pdm_time

Accumulated walking time today

sec
temp

Internal temperature (in (1/256)C)

C
humidity

Humidity (in (1/10)%)

%
illuminance Illuminance (in (1/256)lx) lx
co2

CO2 concentration

ppm
warning_type

Warning type

phone_number

Phone number

mess_content

Message content

pid_X

PID data

body_status

Body status:
BYTE0: Door status

  • BIT0: Left-front door (0: Closed 1: Open)
  • BIT1: Right-front door (0: Closed 1: Open)
  • BIT2: Left-back door (0: Closed 1: Open)
  • BIT3: Right-back door (0: Closed 1: Open)
  • BIT4: Luggage door (0: Closed 1: Open)

BYTE1: Gear status

  • 0x00: Not supported
  • 0x50: Park
  • 0x52: Reverse
  • 0x4E: Neutral
  • 0x44: Drive

BYTE2: LED status

  • BIT0: Engine LED (0: Closed 1: Open)
  • BIT1: ABS LED (0: Closed 1: Open)
  • BIT2: SRS LED (0: Closed 1: Open)
  • BIT3: Brake LED (0: Normal/Released 1: Abnormal/Braking)
  • BIT4: Central locking (0: Unlocked 1: Locked)

BYTE3: Misc

  • BIT0: ACC (0: Off 1: On)
  • BIT1: Tire Pressure Monitor System (0: Normal 1:Abnormal)
  • BIT2, BIT3: Remote key (00: No key is pressed 01: Unlock key is pressed 10: Lock key is pressed)

PX

Fault code

full_steps

Accumulated steps in total

full_time

Accumulated walking time in total

sec
full_distance

Accumulated walking distance in total

mm
full_energy

Accumulated burnt energy in total

cal
day_steps

Accumulated steps in last day

day_time

Accumulated walking time in last day

sec
day_distance

Accumulated walking distance in last day

mm
day_energy

Accumulated burnt energy in last day

cal
instr_pac

Instruction content

instr_type Instruction type
instr_uid

Instruction UID

cmd_answer

Instruction content

language

Device language: 0x00 — Chinese; 0x01 — English; Other — Undefined

time_zone

Device timezone

sys_ver

System version

app_ver

Application version

ps_ver

Param-set version

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone