SmartWitness Gateway

Features SmartWitness Gateway:

Blackbox

Supported in Wialon:

Remote management via GPRS
Alarm button

The following data should also be added to SmartWitness Gateway unit properties section of Wialon GPS tracking software:

Device type:	SmartWitness Gateway
Unique ID:	DRID

Specify the following parameters in configuration software or configuration SmartWitness Gateway for use in Wialon Hosting:

Server port:

21363

507 units of SmartWitness Gateway device type are connected to Wialon Data Center. This represents 0.94% of all Protocols and retranslators connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
event_type	Event which triggered message
ign	Ignition. 1 - ON, 0 - OFF.
camera	The number of the camera from which photo/video was received
video_uri	Link to video
event	Prefixed value corresponding to event_type: 1 - AlarmIn 2 - Signal 3 - Turn 4 - Accelerate 5 - Brake 6 - Shock 7 - Stationary 8 - Speed 9 - Ecall (severe G-Force event) 10 - GEOFence 11 - ServerForce 12 - PanicButton 13 - ManualBackup 14 - FirmwareUpdate 15 - SettingsBackup 16 - SettingsUpdate 17 - MediaFormat 18 - GSensorCalibration 19 - DeviceReboot 20 - AlarmOutControl 21 - DeviceUpdate 22 - NetConfigUpdate 23 - DeviceInitialized 24 - MediaError 25 - DeviceOffline 26 - DeviceOnline 27 - DeviceFault 28 - InstallationValidated 29 - LocationChanged 30 - IgnitionOn 31 - IgnitionOff 32 - LiveTrack 33 - Moving 34 - ManualBackupJPG 35 - TripCompleted

There is no need to point these devices to Wialon Server IP and Port. All SmartWitness Gateway devices will be shipped preconfigured.

Allows for immediate event-based data transfer to Wialon. Video file (up to 20 sec) request from the device internal storage is also available.

To learn more about SmartWitness Cameras (Smartwitness Gateway) integration with Wialon, download the presentation.

Gurtam products

Niche products for addressing specific tasks

SmartWitness Gateway

More devices from the manufacturer