Number of units
The following data should also be added to EGTS unit properties section of Wialon GPS tracking software :
| Device type: | EGTS |
| Unique ID: | Same as for retranslating device |
Specify the following parameters in configuration software or configuration EGTS for use in Wialon Hosting :
| Server port: | 20629 |
7801 units of EGTS device type are connected to Wialon Data Center. This represents 7% of all Protocols and retranslators connected.
Below chart represents the dynamic of connections in the last 30 days:
| Parameter name | Description | Units |
|---|---|---|
| flg | additional parameters of the navigation package (EGTS_SR_POS_DATA) |
|
| vdop | Vertical dilution of precision (EGTS_SR_EXT_POS_DATA) |
|
| hdop | Horizontal dilution of precision (EGTS_SR_EXT_POS_DATA) |
|
| pdop | Position dilution of precision (EGTS_SR_EXT_POS_DATA) |
|
| sat | Satellites (EGTS_SR_EXT_POS_DATA) |
|
| ns | NS - bit flags characterizing the used navigation satellite systems. (EGTS_SR_EXT_POS_DATA) The following (decimal) flag values are defined: 0 - system not defined; 1 - GLONASS; 2 - GPS; 4 - Galileo; 8 - Compass; 16 - Beidou; 32 - DORIS; 64 - IRNSS; 128 - QZSS |
|
| st | Current operating mode. (EGTS_SR_STATE_DATA) List of modes: 0 "Passive" |
|
| pwr_ext | MPSV - The value of the voltage of the main power source (EGTS_SR_STATE_DATA) |
0.1 V |
| pwr_int | IBV - Internal battery voltage value (EGTS_SR_STATE_DATA) |
0.1 V |
| bbv | BBV - Backup battery voltage value (EGTS_SR_STATE_DATA) |
0.1 V |
| acc_x | XAAV - value of linear acceleration along the X axis (the most significant bit determines the sign, 1 indicates a negative value), in m/s2 with a resolution of 0.1 m/s2; (EGTS_SR_ACCEL_DATA) |
m/s2 |
| acc_y | YAAV - value of linear acceleration along the Y axis (the most significant bit determines the sign, 1 indicates a negative value), in m/s2 with a resolution of 0.1 m/s2; (EGTS_SR_ACCEL_DATA) |
m/s2 |
| acc_z | ZAAV - value of linear acceleration along the Z axis (the most significant bit determines the sign, 1 indicates a negative value), in m/s2 with a resolution of 0.1 m/s2; (EGTS_SR_ACCEL_DATA) |
m/s2 |
| inputs | Inputs (EGTS_SR_ABS_DIG_SENS_DATA) |
|
| dsn#_state | Digital Sensor State. (EGTS_SR_ABS_DIG_SENS_DATA) # is Digital Sensor Number |
|
| adc# | Analog Sensor Value (EGTS_SR_ABS_AN_SENS_DATA) | |
| counter# | CNV - the value of the readings of the counting input. (EGTS_SR_ABS_CNTR_DATA) # is "CN" - counting input number; |
|
| lin#_state | LIS - loop input state value. (EGTS_SR_ABS_LOOPIN_DATA) # - loop input number; |
|
| lls_err_flag | LLSEF - Liquid Level Sensor Error Flag (EGTS_SR_LIQUID_LEVEL_SENSOR) |
|
| lls_format | RDF - (Raw Data Flag) flag that determines the format of the LLSD field (EGTS_SR_LIQUID_LEVEL_SENSOR) |
|
| lls_unit | LLSVU - (Liquid Level Sensor Value Unit) bit flag that determines the units of measure for readings (EGTS_SR_LIQUID_LEVEL_SENSOR)
0 - Uncalibrated LLS reading. |
|
| module_addr | MADDR - address of the module from which data on LLS readings were received by the subscriber terminal (number of external port of subscriber terminal) (EGTS_SR_LIQUID_LEVEL_SENSOR) |
|
| lls# | LLSD (Liquid Level Sensor Data) (EGTS_SR_LIQUID_LEVEL_SENSOR) # is LLSN - (Liquid Level Sensor Number) sensor serial number; |
|
| dpr | DPR - (Doors Presented) a bit field that determines the presence of counters on the doors and the structure of the PCD field (bit 0 determines the presence of a counter on the 1st door, bit 1 on the 2nd, etc.). If the bit has a value of 1, then the counter is used; if 0, it is not used; (EGTS_SR_PASSENGERS_COUNTERS) | |
| drl | DRL - (Doors Released) a bit field that defines the doors that opened and closed when counting passengers (for example, 00000000 - none of the doors opened, 00000001 - only the 1st door opened, 00001001 - the 1st and 4th doors opened a door); (EGTS_SR_PASSENGERS_COUNTERS) |
|
| madr | MADDR is the address of the module from which data from the passenger flow counters were received by the subscriber terminal (number of the external port of the subscriber terminal); (EGTS_SR_PASSENGERS_COUNTERS) |
|
| ipq_# | IPQ1...IPQ8 - number of entered passengers through 1 ... 8 doors; (EGTS_SR_PASSENGERS_COUNTERS) |
|
| opq_# | OPQ1...OPQ8 - the number of exiting passengers through 1 ... 8 doors; The presence or absence of the IPQ and OPQ fields is determined by the bits of the DPR field of the EGTS_SR_PASSENGERS_COUNTERS subrecord. If the bit corresponding to a particular door number in the DPR field has the value 1, then the corresponding IPQ and OPQ fields are present in the structure. If a bit in the DPR field has the value 0, then the corresponding IPQ and OPQ fields are not present in the structure. If a particular IPQ field is present, then the corresponding OPQ field is also present. (EGTS_SR_PASSENGERS_COUNTERS) |
|
| cb_moto | Engine hours read (EGTS_SR_CAN_DATA) |
hours |
| cb_odometr | Mileage read (EGTS_SR_CAN_DATA) |
km |
| cb_speed | Vehicle speed (EGTS_SR_CAN_DATA) |
km/h |
| cb_odom_to | Mileage before maintenance (EGTS_SR_CAN_DATA) |
km |
| cb_fuel_consumption | Total fuel consumption read (EGTS_SR_CAN_DATA) |
liter |
| cb_fuel_level | Fuel level in the tank read (EGTS_SR_CAN_DATA) |
% |
| cb_fuel_volume | Fuel level in the tank read (EGTS_SR_CAN_DATA) |
liter |
| cb_liquid_level | AdBLUE liquid level (EGTS_SR_CAN_DATA) |
% |
| cb_liquid_volume | AdBLUE liquid level (EGTS_SR_CAN_DATA) |
liter |
| cb_temp_coolant | Coolant temperature (engine temperature -40 to 210 °C) (EGTS_SR_CAN_DATA) |
°C |
| cb_engine_rpm | Engine rpm (EGTS_SR_CAN_DATA) |
rpm |
| cb_gas_pedal | Accelerator position 0 to 100% (EGTS_SR_CAN_DATA) |
% |
| cb_load_engine | Engine load 0 to 125% (EGTS_SR_CAN_DATA) |
% |
| cb_axis_weight_# | Axle load (EGTS_SR_CAN_DATA) # is an axle number |
kg |
| cb_guard_alarm | Crash controllers (EGTS_SR_CAN_DATA):
0 side lights |
|
| cb_accident | Security/guard parameters (EGTS_SR_CAN_DATA):
0 ignition on |
|
| cb_machinery | Condition of agricultural machinery (EGTS_SR_CAN_DATA): 0 ignition on |
|
| cb_bk_vulkan | Parameters from the on-board computer "VulKan" (EGTS_SR_CAN_DATA):
0 Discarded concave state |
|
| cb_reaper_hours | harvest time (EGTS_SR_CAN_DATA) |
|
| cb_harvested_area | Harvested area (EGTS_SR_CAN_DATA) |
|
| cb_productivity | Performance (EGTS_SR_CAN_DATA) |
|
| cb_harvest_amount | Harvested quantity (EGTS_SR_CAN_DATA) | tons |
| cb_grain_moisture | Grain moisture content (EGTS_SR_CAN_DATA) |
% |
| cb_threshing_drum_rpm | Threshing drum rpm (EGTS_SR_CAN_DATA) |
rpm |
| cb_out_concave_clrnc | Outlet concave clearance (EGTS_SR_CAN_DATA) |
|
| ida | IDA (Identity Device Address) – reader network address or reader number specified by the block. (EGTS_SR_IDENTITY_DATA) |
|
| icn | ICN (Identity Card Number) – the value of the serial number of the card, the length is determined by the length of the serial number, the upper unused bits are filled with zeros. (EGTS_SR_IDENTITY_DATA) |
|
| avl_driver_id | ICN (Identity Card Number) – the value of the serial number of the card, the length is determined by the length of the serial number, the upper unused bits are filled with zeros. (EGTS_SR_IDENTITY_DATA) |
|
| temp_# | TS1…N (Temperature Sensor) – Value from temperature sensors in degrees Celsius. (EGTS_SR_TRMO_DATA) |
°C |
| refr_type | REFR_TYPE (Refrigerator Model) – refrigerator model (type). The refrigerator model is selected when configuring the terminal (locally or remotely). (EGTS_SR_THERMO_DATA)
TKDL-PRO - 0 |
