Teltonika GH1201

Teltonika GH1201
Manufacturer: Teltonika
User rating

(12 Votes)

Forum Discussion

Number of units

0
Online
13
Total
Features Teltonika GH1201:
  • Blackbox
Supported in Wialon:
  • Discontinued
  • SMS sending of data
  • Remote management via SMS
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Teltonika GH1201 unit properties section of Wialon GPS tracking software:

Device type: Teltonika GH1201
Unique ID: imei

Specify the following parameters in configuration software or configuration Teltonika GH1201 for use in Wialon Hosting:

Server IP Address: 193.193.165.165
Server port: 20119

13 units of Teltonika GH1201 device type are connected to Wialon Data Center. This represents 0.1% of all Personal trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
battery_charge Battery charge
canN CAN specific data (I/O property 145-154)
counter1 Fuel Counter (I/O property 76)
driver_code Shows the moment of binding/unbinding a driver:
1 - binding
0 - unbinding
driver_status Garmin driver status
gsm GSM signal strength level 0 (lowest) – 5 (highest) (I/O property 21)
hdop Horizontal Dilution of Precision (I/O property 20 or 182)
last_driver_status Last Garmin driver status
paramN Value of special I/O property, where N - ID of property
pdop Position Dilution of Precision (I/O property 22)
priority Message Priority:
0 - low
1 - high
2 - panic
3 - security
pwr_ext Power supply voltage (I/O property 66) V
pwr_int Battery voltage (I/O property 67) V
vdop Vertical Dilution of Precision (I/O property 21)

You may also download a sample of Teltonika GH1201 configuration for connecting it to GPS tracking software.

You can also download an example of object configuration file for Teltonika GH1201 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with sensors.

For communication via SMS, enter "login password" defined for the device and divided by the space in the "Device access password" field of the GPS unit in Wialon GPS tracking software.

To support «24 SMS in 1» mode, the interval between the points should be 900 seconds as it is on the server, i.e. the value should be 900000 ms in the device configuration.

More devices from the manufacturer