Micron Prime AT Plus

Micron Prime AT Plus
Manufacturer: Micron
User rating

(4 Votes)

Forum Discussion

Number of units

9
Online
126
Total
Features Micron Prime AT Plus:
  • Blackbox
Supported in Wialon:
  • Remote management via GPRS
  • LBS
  • Remote management via SMS
  • Communication via TCP
  • Communication via UDP
Can be supported upon request:
  • SMS sending of data

The following data should also be added to Micron Prime AT Plus unit properties section of Wialon GPS tracking software:

Device type: Micron Prime AT Plus
Unique ID: imei

Specify the following parameters in configuration software or configuration Micron Prime AT Plus for use in Wialon Hosting:

Server IP Address: 193.193.165.165
Server port: 21066

126 units of Micron Prime AT Plus device type are connected to Wialon Data Center. This represents 1% of all Personal trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
gps_acc GPS accuracy
battery The current volume of the backup battery %
report_type Type of report
inputN The current logical status of the input port number N:
0 - is disable status
1 - is enable status
call_number The phone number of the incoming call which initiates this report
power_percent The current volume of the backup battery %
iccid The ICCID of the SIM card
temp The temperature of the Device °C
lightness The lightness level
pwr_int The voltage of the battery V
csq_rssi The GSM signal strength level. The range is 0-31, 99 for unknown
csq_ber The quality of the GSM signal. The range is 0-7, 99 for unknown
dev_type The type of device
soft_ver The software version
hard_ver The hardware version
is_pwr_ext Whether the external power supply is connected.
0 - not connected
1 - connected
charging Whether the backup battery is charging when the main power supply is connected.
0 - not charging
1 - charging
led_on Indicate whether the LED’s are turned on
backup_baterry The voltage of the battery V
motion_state The current motion state of device:
21 - The device attached vehicle is ignition on and motionless
22 - The device attached vehicle is ignition on and moving.
41 - The device is motionless without ignition on
42 - The device is moving without ignition on
motion_state_chg The state of the device changed:
0 - from motion to rest;
1 - from rest to motion.
ign Ignition state: 0 - off, 1 - on
light_state The lightness state:
0: Report after the GPS fixing finished of timeout.
1: Lightness is greater than the bright threshold (Device from dark place to light place).
2: Lightness is less than the dark threshold (Device from light place to dark place).

More devices from the manufacturer