OBD tracker Xirgo XT-2469 | Integrated with Wialon

Features Xirgo XT-2469:

4G/LTE

Supported in Wialon:

Accelerometer
Communication via UDP

The following data should also be added to Xirgo XT-2469 unit properties section of Wialon GPS tracking software :

Device type:	Xirgo XT-2469
Unique ID:	serial

Specify the following parameters in configuration software or configuration Xirgo XT-2469 for use in Wialon Hosting :

Server port:

21751

1143 units of Xirgo XT-2469 device type are connected to Wialon Data Center. This represents 1.43% of all OBD trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
reason	Reason Code
obd_accel	OBD Harsh Accel Value	Mph/s
obd_brake	OBD Harsh Brake Value	Mph/s
obd_eng_rpm	Obd Engine Rpm	Rpm
hdop	Hdop
odo	Odometer	m
obd_mpg	Obd MPG
pwr_ext	Vehicle battery voltage	V
sig_str	Signal Quality
obd_fuel_level	Obd Fuel Level	%
packet_seq	Packet Serial Number
packet_id	Packet ID
acc_max	Max Accel	mG
acc_duration	Accel Event Duration	sec
wake_reason	Wake Reason Value
boot_status	Boot Status Value
apn_index	Apn Index
pwr_int	Internal Battery	V
gps_odo	Odometer	m
obd_vin	Obd VIN
obd2_odo	OBDII Odometer
obd2_oil_life	OBDII Oil life
obd2_tpms_lf	OBDII TPMS LF
obd2_tpms_rf	OBDII TPMS RF
obd2_tpms_lr	OBDII TPMS LR
obd2_tpms_rr	OBD2 TPMS RR
obd2_tpms_lri	OBD2 TPMS LRI
obd2_tpms_rri	OBD2 TPMS RRI
obd2_tpms_spr	OBD2 TPMS SPR
obd2_dr_sbelt	OBDII driver seatbelt
OBD2_ps_sbelt	OBD2 passenger seatbelt
obd2_fuel_level	OBD2 fuel level
obd2_airbag	OBDII airbag
obd2_gear	OBDII gear
obd2_pbs	OBDII parking brake status
obd2_pbl	OBDII parking brake lamp
mil	DTC: Malfunction Indicator Lamp 0x80 = Malfunction Indicator Lamp, 0x40 = Red Stop Lamp, 0x20 = Amber Warning Lamp, 0x10 = Protect Lamp, 0x08 = Flashing Malfunction Indicator Lamp, 0x04 = Flashing Red Stop Lamp, 0x02 = Flashing Amber Warning Lamp, 0x01 = Flashing Protect Lamp, 0x00 = No Lamp
ecu_count	DTC: Number of vehicle electronic control units that are reporting fault codes
ecu_id1	DTC: Unique identifier for ECU
sys_#	DTC: System Associated with code P = Powertrain, B = Body, C = Chassis, U = Network, S = Sub-system ID (J1587), 0 = (ascii 0) no system associated – dtc code (pid/spn) defines specific system # - number
dtc_#	DTC: dtc code, # - number
fmi_#	DTC: Fault Mode Identifier # - number

!In case you're using CoAP firmware, use Xirgo XT-2469 (CoAP) device type.

In Wialon there's an option for uploading configuration file which describes messages’ configuration from the device. To do that, please specify the configuration file in the field "Configuration file" of the advanced settings of the device type in Wialon (wrench icon). Format: pcr|mask.

For example, a file may contain: 10|010304060708090b0a131514120c which means that the packet id = 10 with parameters 01, 03, 04, etc. will be parsed. The next packet should be described with a new line.

Fill out a request form to get started with Wialon