Manufacturer: T-Zone
Forum Discussion

Number of units

Features TZ-AVL19:
  • Blackbox
Supported in Wialon:
  • LBS
  • Communication via TCP

The following data should also be added to TZ-AVL19 unit properties section of Wialon GPS tracking software:

Device type: TZ-AVL19
Unique ID: imei

Specify the following parameters in configuration software or configuration TZ-AVL19 for use in Wialon Hosting:

Server port: 21473

3 units of TZ-AVL19 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
mileage GPS mileage m
valid valid bit:
1 if GPS coordinates are valid,
0 otherwise
lac Location Area Code
cell_id Cell ID
alarm_type Alarm type
terminal_status Terminal info byte
bit7 - External power or not, bit6 - Data ends or not, bit5-0 - Undefined
sos SOS message
gsm GSM signal strength
gsm_status GSM status byte
bi7-6 - Undefined, bit5 - TCP created conection or not, bit4 - Registered to GPRS network or not, bit3 - Roam or not, bit2 - Registered to GSM network or not, bit1 - Detect SIM card or not, bit0 - Module activated or not

pwr_int battery voltage V
pwr_ext external voltage V
ada V
adb V
tag06_#_status tag06 status
# is tag ID
bit7: Battery voltage status, 1-low Voltage,0- Voltage normal;bit6: Temperature status ,1- Temperature more than set high and low temperature threshold, 0- Temperature normal,bit5-bit0 is reserved;
io_status input/output status
1 means with action execution, 0 means no action execution
temp Temperature °C
temp_status Temperature status
1-disconnect, 0-connect
tag06_bits tag06 bits
tag06_#_battery tag06 battery
# is tag ID
tag06_#_temp tag06 temperature
# is tag ID
tag06_#_temp_status tag06 temperature status
# is tag ID
tag06_#_humidity tag06 humidity
# is tag ID
tag06_#_rssi tag06 rssi
# is tag ID
kids_get_on means there are # kids have got on the bus.
kids_get_off means there are # kids have got off the bus.
battery_# Battery voltage
# is ID
temp_#1_#2_status Temperature status
#1 is ID, #2 is number of way
0-connect, 1-disconnected
temp_#1_#2 Temperature
#1 is ID, #2 is number of way
card_#_num Card number
# is type ( "125k", "uhf", "m1", "2.4g")
card_#_bits Card bits
# is type ( "125k", "uhf", "m1", "2.4g")
card_#_value Card value
# is type ( "125k", "uhf", "m1", "2.4g")
ibutton_bits ibutton bits
ibutton_# iButton
# is ibutton number

More devices from the manufacturer