GPS tracker Totem Tech - AT07 | Integrated with Wialon

Features Totem Tech - AT07:

Blackbox
Built-in odometer

Supported in Wialon:

ADC sensors
Camera connection
Communication with driver
Garmin support
Remote management via GPRS
Driver identification
Digital sensors
Remote management via SMS
Alarm button
Communication via TCP

The following data should also be added to Totem Tech - AT07 unit properties section of Wialon GPS tracking software:

Device type:	Totem Tech - AT07
Unique ID:	imei

Specify the following parameters in configuration software or configuration Totem Tech - AT07 for use in Wialon Hosting:

Server port:

21084

414 units of Totem Tech - AT07 device type are connected to Wialon Data Center. This represents 0.02% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
vehicle_status	Alarm code Status Bit 32: Panic button. (1=SOS, 0= without SOS) Bit 31: ACC IN1 (1= ignition ON, 0= ignition OFF) Bit 30: Over speed (1= over speed, 0= without over speed) Bit 29: External power (1= with supply power, 0= without supply power) Bit 28: GEO fence(out) (1=out alarm, 0= none out alarm) Bit 27: GEO fence(in) (1= GEO in alarm, 0= without in alarm) Bit 26: GPS antenna drop (1= GPS antenna drop alarm, 0= GPS antenna is ok) Bit 25: GPS module error (1= module error, 0= GPS module is ok) Bit 24: Output1 (1= digital output1 in high level, 0= digital output1 in low level) Bit 23: Output2 (1= digital output2 in high level, 0= digital output2 in low level) Bit 22: Output3 (1= digital output3 in high level, 0= digital output3 in low level) Bit 21: IN2 (digital input 2) (1= digital intput2 has been triggered, 0= digital input2 without triggering) Bit 20: IN4 (digital input 4) (1= digital intput4 has been triggered, 0= digital input4 without triggering) Bit 19: Shocking (1= shocking alarm, 0= without shocking). Status will show ‘1’ if it’s in shocking even shock alarm has been disabled. Bit 18: Idle (1= Idle speed alarm, 0= without idle speed) Bit 17: Inner battery in low level (1= inner battery voltage is low, 0= inner battery voltage is ok) Bit 16: Unauthorized Driving (1= Unauthorized driving, 0 = without unauthorized driving) Bit 15: GPS status (1= GPS fixed, 0= No GPS fixed) Bit 14: Inner batter in charging (1= battery charge, 0= batter not charging)
charge_indicator	Charge indicator: A=1: charging, A=0:Non-charging;
pwr_int	Battery voltage.	V
pwr_ext	External power source.	V
adc 1	Collected voltage. One analog sensor.	V
lac	Location area code.
cell_id	Cell ID
hdop	Horizontal dilution of precision
mileage	Mileage between last pcs GPRS message and current data.	m

Parameter name

Description

Units

vehicle_status

Alarm code Status

Bit 32: Panic button. (1=SOS, 0= without SOS)

Bit 31: ACC IN1 (1= ignition ON, 0= ignition OFF)

Bit 30: Over speed (1= over speed, 0= without over speed)

Bit 29: External power (1= with supply power, 0= without supply power)

Bit 28: GEO fence(out) (1=out alarm, 0= none out alarm)

Bit 27: GEO fence(in) (1= GEO in alarm, 0= without in alarm)

Bit 26: GPS antenna drop (1= GPS antenna drop alarm, 0= GPS antenna is ok)

Bit 25: GPS module error (1= module error, 0= GPS module is ok)

Bit 24: Output1 (1= digital output1 in high level, 0= digital output1 in low level)

Bit 23: Output2 (1= digital output2 in high level, 0= digital output2 in low level)

Bit 22: Output3 (1= digital output3 in high level, 0= digital output3 in low level)

Bit 21: IN2 (digital input 2) (1= digital intput2 has been triggered, 0= digital input2 without triggering)

Bit 20: IN4 (digital input 4) (1= digital intput4 has been triggered, 0= digital input4 without triggering)

Bit 19: Shocking (1= shocking alarm, 0= without shocking). Status will show ‘1’ if it’s in shocking even shock alarm has been disabled.

Bit 18: Idle (1= Idle speed alarm, 0= without idle speed)

Bit 17: Inner battery in low level (1= inner battery voltage is low, 0= inner battery voltage is ok)

Bit 16: Unauthorized Driving (1= Unauthorized driving, 0 = without unauthorized driving)

Bit 15: GPS status (1= GPS fixed, 0= No GPS fixed)

Bit 14: Inner batter in charging (1= battery charge, 0= batter not charging)

charge_indicator

Charge indicator: A=1: charging, A=0:Non-charging;

pwr_int

Battery voltage.

pwr_ext

External power source.

adc 1

Collected voltage. One analog sensor.

lac

Location area code.

cell_id

Cell ID

hdop

Horizontal dilution of precision

mileage

Mileage between last pcs GPRS message and current data.

Fill out a request form to get started with Wialon

Gurtam products

Niche products for addressing specific tasks

Totem Tech - AT07

More devices from the manufacturer

Contact Gurtam and achieve the most ambitious goals with telematics

Become a partner

Request Wialon in your region

Fill out a request form to get started with Wialon