Topflytech TLP1

Topflytech TLP1
Forum Discussion

Number of units

0
Online
0
Total
Supported in Wialon:
  • Accelerometer
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Topflytech TLP1 unit properties section of Wialon GPS tracking software :

Device type: Topflytech TLP1
Unique ID: imei

Specify the following parameters in configuration software or configuration Topflytech TLP1 for use in Wialon Hosting :

Server port: 21788

0 units of Topflytech TLP1 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
mcu_model

MCU model

(not set)
mcu_fw_ver

MCU firmware version

(not set)
modem_ver

Modem version

(not set)
modem_app

Modem App version

(not set)
hw_ver

Hardware version

(not set)
gnss_status

Data and GNSS status:

Bits 0-4: locked satellite count

Bit 5: 0 -> GNSS is in working mode

1 -> GNSS is in sleeping mode

Bit 6: 0 -> LBS data

1 -> GNSS data

Bit 7: 0 -> realtime data

1 -> history data

(not set)
alarm

Alarm type

(not set)
mcc

Mobile Country Code

(not set)
mnc

Mobile Network Code

(not set)
lac

Location Area Code

(not set)
cell_id

Cell Tower ID

(not set)
acc_x

X-axis acceleration

g
acc_y

Y-axis acceleration

g
acc_z

Z-axis acceleration

g
battery_percent

Build in Battery Voltage

%
temp

Device Internal Temperature

front_light

Front Light Sensor Voltage

V
pwr_int

Internal Battery Voltage

V
solar_voltage

Solar Panel Voltage

V
odom

Odometer

m
status

Status:

Bits 0-2: reserved

Bit 3: 0 ->solar panel doesn't charge the battery

1 -> solar panel is charging the battery

Bits 4-10: Network signal strength. Range: 0~100

Bits 11-14: show 4 manager phone number set or not. (1=set, 0=not)

Bit 15: 0 -> USB cable disconnected(without power)

1 -> USB cable connected(with power)

(not set)
network_signal

Network signal strength

(not set)
acc_on

ACC ON Upload Interval

s
acc_off

ACC OFF or Accdet=0 Upload Interval

s
angle

Angle Upload Interval

Degree
distance

Distance Upload Interval

m
heart

Heartbeat

minute
settings_status

Current Setting Status Information:

Bit 0: device internal temperature reading and uploading setting status (1 - enable, 0 - disable)

Bit 1: open case alarm setting status (1 - enable, 0 - disable)

Bit 2: device remove alarm setting status (1 - enable, 0 - disable)

Bit 3: front sensor setting status (1 - enable, 0 - disable)

Bit 4: G-sensor setting status (1 - enable, 0 - disable)

Bit 5: AGPS Ephemeris data download setting status (1 - enable download, 0 - disable download)

Bit 6: lock device setting status (1 - locked, 0 - unlocked)

Bit 7: lock SIM card setting status (1 - locked, 0 - unlocked)

Bit 8: reserved

Bit 9: reserved

Bit 10: reserved

Bit 11: reserved

Bit 12: GPS (1 - enable gps, 0 - disable gps)

Bit 13: mileage unit setting status (1 - unit is mile, 0 - unit is km)

Bit 14: ACCDET setting status (1 - enable, 0 - disable)

Bit 15: SMS alert setting status (1 - enable, 0 - disable)

(not set)
msg

message to manager

(not set)
network_operator

Network Operators name

(not set)
access_name

Access Technology Name

(not set)
band_name

Band Name

(not set)
imsi

SIM Card IMSI

(not set)
iccid

ICCID

(not set)

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone