StecTrace

StecTrace
Manufacturer: STECCOM
Forum Discussion

Number of units

0
Online
7
Total
Features StecTrace:
  • Blackbox
  • GLONASS support
  • Satellite terminal
Supported in Wialon:
  • Communication with driver
  • Remote management via GPRS
  • Alarm button
  • Communication via UDP

The following data should also be added to StecTrace unit properties section of Wialon GPS tracking software:

Device type: StecTrace
Unique ID: custom

Specify the following parameters in configuration software or configuration StecTrace for use in Wialon Hosting:

Server port: 21458

7 units of StecTrace device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
battery 3 ≥ 4V
2 ≥ 3.8V
1 ≥ 3.6V
1 <3.6V
ir_dt Interval between sessions on the Iridium channel.
Valid values are from 0 to 10. They correspond to the interval values, sec:
{180, 600, 1800, 3600, 7200, 10800, 14400, 21600, 28800, 43200, 86400}.
ir_tmr_wb Time interval of the lack of communication of the Device with the Digital Brain through the GSM channel, after which a connection is established via the Iridium channel
The default is 180.
seconds
ring_alert Mode of operation of the Iridium module
0 - included in the communication session
1 - always on - the possibility of receiving notifications from the gateway about incoming messages
comm_mode Allowed data paths.
0 - GSM + iridium, default
1 - GSM
2 - Iridium
tracking Transfer of navigation information.
0 - no, by default
1 - yes
channel Connection status


rssi Levels from 0 to 5
shell_event Status shell event
shell_tm_dif Shell event time
bat_event Status battery event
bat_tm_dif Battery event time
geo_event Status geozone event
geo_tm_dif Geozone event time
event{id} Undescribed event
event${id}_tm_dif Undescribed event time
tm_after_on Time after power on