Number of units
The following data should also be added to STD8 Full unit properties section of Wialon GPS tracking software :
| Device type: | STD8 Full |
| Unique ID: | serial |
Specify the following parameters in configuration software or configuration STD8 Full for use in Wialon Hosting :
| Server port: | 20583 |
549 units of STD8 Full device type are connected to Wialon Data Center. This represents 0.02% of all AVL Hardware connected.
Below chart represents the dynamic of connections in the last 30 days:
| Parameter name | Description | Units |
|---|---|---|
| fieldN | Additional field N value | |
| countN | field(N+N-1) * 1000 + field(N+N) % 1000 | |
| count | adc2 * 1000 + adc1 % 1000 | |
| flag1 | GPS signal absence | |
| flag2 | Unit is not moving | |
| flag3 | Acceleration. Level 1 | |
| flag4 | Acceleration. Level 2 | |
| flag5 | Digital input 1 | |
| flag6 | Digital input 2 | |
| flag7 | Digital output 1 | |
| flag8 | Digital output 2 | |
| gsm | GSM signal level (SIM card number). Example: 20(1). 20 - GSM signal level, 1 - SIM card number | |
| pwr_ext | External battery voltage | Volt |
| pwr_int | Internal battery voltage | Volt |
| ver | Firmware version |
You can also download an example of object configuration file for STD8 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.
