RIFA-M

RIFA-M
Manufacturer: Antzer Tech
Forum Discussion

Number of units

0
Online
1
Total
Features RIFA-M:
  • 3G
  • 4G/LTE
  • Blackbox
  • BLE enabled

The following data should also be added to RIFA-M unit properties section of Wialon GPS tracking software:

Device type: RIFA-M
Unique ID: imei

Specify the following parameters in configuration software or configuration RIFA-M for use in Wialon Hosting:

Server port: 22137

1 units of RIFA-M device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
event_code

Event Code:

2 - GPRS Time based tracking event

3 - Set/Read TCP/UDP Command OK

4 - Set/Read TCP/UDP Command Fail

5 - Set/Read Invalid TCP/UDP Command

6 - Firmware Update successfully (FOTA)

7 - Firmware Update failed (FOTA)

21 - Input on Alert

22 - Input off Alert

23 - Output on Alert

24 - Output off Alert

25 - Motion on alert

26 - Motion off alert

27- Impact on alert

28 - Impact off alert

29 - Idle on alert

30 - Idle off alert

31 - Towing detected alert

32 - Towing stopped alert

33 - Moving detected

34 - Moving stopped

35 - Harsh acceleration on event

36 - Harsh acceleration off event

37 - Harsh brake on event

38 - Harsh brake off event

39 - Harsh cornering on event

40 - Harsh cornering off event

41 - Direction change alert

43 - Main power on event

44 - Main power off event

45 - Main power low voltage on event

46 - Main power low voltage off event

47 - Backup battery low voltage on event

48 - Backup battery low voltage off event

49 - Over speed on event

50 - Over speed off event

51 - Geofence in event

52 - Geofence out event

53 - Wake up by G-sensor (1), by Engine on (2) or by ACC on (3)

56 - Engine Run Time (minutes)

event_param Event Parameters
gps_valid 1 if a GPS valid fix. 0 if not a valid fix
odometer Odometer
adc1 Analog Input Value V
cmd_name Command name
cmd_response Command response

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone