Quake Global Q4000 Iridium

Quake Global Q4000 Iridium
Manufacturer: Quake Global
User rating

(0 Votes)

Forum Discussion

Number of units

0
Online
2
Total

The following data should also be added to Quake Global Q4000 Iridium unit properties section of Wialon GPS tracking software:

Device type: Quake Global Q4000 Iridium
Unique ID: serial

Specify the following parameters in configuration software or configuration Quake Global Q4000 Iridium for use in Wialon Hosting:

Server IP Address: 193.193.165.165
Server port: 20919

2 units of Quake Global Q4000 Iridium device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

When connecting «Quake Global Q4000 Iridium» with TurnKey profile to Wialon obey the following rules:

1. When configuring messages in Add TurnKey profile the following fields are mandatory: «message count to message», «time to message», «modem ID to modem-originated message». Field «modem ID» value must be indicated in the first field «Unique ID» in unit properties in Wialon. Unlike fields decsribed below these fields need not be indicated in option «Messages format:» in unit properties in Wialon in «Device configuration» tab.

2. Other fields are optional. If they are selected when configuring messages in TurnKey profile they must be indicated in option «Messages format:» in unit properties in Wialon in «Device configuration» tab.

Add TurnKey Parameter name in option «Messages format:»
latitude to message lat
longitude to message lon
altitude to message alt
speed to message spd
heading to message hdn
DIOs to message io
Analog 0 to message adc0
Analog 1 to message adc1
Battery Power to message bat
PULSE COUNT data to message

or

CAN data to message
cnters

or

can

These fields must be written in option "Messages format:" in the aforeindicated order.
ATTENTION!!! The order of parameters can not be changed.

«Messages format:» option content example when all the fields and impulse counters are selected:

lat,lon,alt,spd,hdn,io,adc0,adc1,bat,cnters

«Register raw data» option activation in «Device configuration» tab allows to view raw data received from the device.

TurnKey profile settings can be handled both by RS232 interface or by sending commands via SMS or Iridium.

If you have questions on configuration and maintenance of Quake Global Q4000 / Q-PRO you may send a request to E-mail: mss.ekb@marsat.ru.

More devices from the manufacturer