Omnicomm Profi

Omnicomm Profi
Manufacturer: Omnicomm
Forum Discussion

Number of units

Features Omnicomm Profi:
  • Blackbox
  • GLONASS support
  • Built-in odometer
Supported in Wialon:
  • ADC sensors
  • CAN-bus support
  • Driver identification
  • Digital sensors
  • MobilEye support
  • Remote management via SMS
  • Communication via TCP

The following data should also be added to Omnicomm Profi unit properties section of Wialon GPS tracking software:

Device type: Omnicomm Profi
Unique ID: serial

Specify the following parameters in configuration software or configuration Omnicomm Profi for use in Wialon Hosting:

Server port: 20617

1315 units of Omnicomm Profi device type are connected to Wialon Data Center. This represents 0.13% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
amtr_x Acceleration along the X-axis g/100
amtr_y Acceleration along the Y-axis g/100
amtr_z Acceleration along the Z-axis g/100
battery Battery level %
cllsN Fuel sensor level
flg Status flags
fllsN Fuel sensor state: 0 - off, 1 - not ready, 2 - ready, 3 - error
id_fas The ID of the onboard equipment
mid Event ID
mileage Mileage m
pwr_ext External power V
spnN CAN bus data See FMS standard
sum_acc , where a - acceleration along axis g
timp Engine RPM sensor value rpm
tllsN Fuel sensor temperature °C
vimp Speed sensor value km/h
mobileye_status MobilEye status (bitfield by CAN 700):
1bit - Peds FCW
2bit - Peds in DZ
3bit - Headway valid
4bit - TSR
5bit - LDW
me_time_indicator ME5 Time indicator
me_time_sound_type ME5 Sound type
me_time_zero_speed ME5 Zero Speed
me_headway_measure ME5 Headway measure
me_error_code ME5 Error code
me_can_mess700_b4 ME5 parameters:
1 bit - LDW OFF
2 bit - Left LDW ON
3 bit - Right LDW ON
4 bit - FCW on
7 bit - Maintence
8 bit - Failsafe
me_can_mess700_b5 ME5 parameters:
2 bit - Peds FCW
3 bit - Peds DZ
6 bit - Tamper Alert
8 bit - TSR enabled
me_tsr_warn_level ME5 TSR Warning Level:
When Speed <= road speed , TSR Warning level= 0
When Speed > road speed +[0-5kmh], TSR Warning level= 1
When Speed > road speed +[5-10kmh], TSR Warning level= 2
When Speed > road speed +[10-15kmh], TSR Warning level= 3
When Speed > road speed +[15-20kmh], TSR Warning level= 4
When Speed > road speed +[20-25kmh], TSR Warning level= 5
When Speed > road speed +[25-30kmh], TSR Warning level= 6
When Speed > road speed +[30-35kmh], TSR Warning level= 7
When Speed > road speed +35, TSR Warning level= 8
me_hw_repeat_enabled ME5 HW repeatable enabled
me_hw_warn_level ME5 Headway Warning Level
me_sign_typeN ME5 Sign Type from Display N
me_supplem_sign_typeN ME5 Supplementary Sign Type from Display N
me_can_mess760_b0 ME5 parameters:
1 bit - Brakes
2 bit - Left Signal
3 bit - Right Signal
4 bit - Wipers
5 bit - Low Beam
6 bit - High Beam
me_can_mess760_b1 ME5 parameters:
4 bit - Wipers Available
5 bit - Low Beam Available
6 bit - High Beam Available
8 bit - Speed Available
me_speed ME5 Speed km/h

More devices from the manufacturer