Meitrack TC68SG

Meitrack TC68SG
Manufacturer: Meitrack
Forum Discussion

Number of units

32
Online
62
Total
Features Meitrack TC68SG:
  • 3G
  • Blackbox
Supported in Wialon:
  • ADC sensors
  • Remote management via GPRS
  • Digital sensors
  • Remote management via SMS
  • Alarm button
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Meitrack TC68SG unit properties section of Wialon GPS tracking software :

Device type: Meitrack TC68SG
Unique ID: imei

Specify the following parameters in configuration software or configuration Meitrack TC68SG for use in Wialon Hosting :

Server port: 21489

62 units of Meitrack TC68SG device type are connected to Wialon Data Center. This represents 0.08% of all OBD trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
RFID RFID code
code Event Code
valid GPS status
gsm GSM signal
hdop Horizontal Dilution of Precision
mileage Total accumulated mileage
engine_hours Total accumulated runtime Hours
ignition Ignition status
battery battery charge
pwr_ext Voltage of external power supply V
engine_rpm Engine rpm rpm
eng_load_calc Engine load calculation %
collant_temp Engine coolant temperature °C
fuel_consumption Fuel consumption L/100 km
intake_air_temp Intake air temperature Kpa
oil_pressure Oil pressure Kpa
atmos_pressure Atmospheric pressure Kpa
intake_pressure Intake-tube absolute pressure Kpa
air_flow Air flow g/s
throttle_pos Throttle position %
engine_mileage One mileage: from the engine start to stop meter
fuel_level Percentage of remain fuel %
system_flag

Bitwise parameter:
Bit 2 - ACC status: 1 - ACC is on, 0 - ACC is off
Bit 3 - anti-theft status: 1 - the device is in arming state, 0 - the
device is disarming state
Bit 4: 1 - the device is vibrating, 0 - the device is not vibrating
Bit 5: 1 - the device is moving, 0 - the device is not moving
Bit 6: 1 - an external power supply is connected, 0 - no external power supply
is connected
Bit 7: 1 - the device is charging, 0 - the device is not charging
Bit 8: 1 - the device is in sleep mode, 0 - the device is working normally

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone