GPS tracker FindMe F3 | Integrated with Wialon

Features FindMe F3:

Blackbox
Dual SIM
GLONASS support

Supported in Wialon:

Accelerometer
Remote management via GPRS
LBS
Remote management via SMS
Communication via TCP

The following data should also be added to FindMe F3 unit properties section of Wialon GPS tracking software :

Device type:	FindMe F3
Unique ID:	imei

Specify the following parameters in configuration software or configuration FindMe F3 for use in Wialon Hosting :

Server port:

21632

0 units of FindMe F3 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
fwere_curr_vers	The current firmware version
fwere_flag	Flag of the firmware change result: 0 – manufacturer's firmware 1 – firmware changed by command from the server 2 – firmware changed by command from the device
gsm_level	CSQ - GSM level
hdop	HDOP: 1 - Perfect 2-3 - Great 4-6 - Good 7-8 - Medium 9-20 - Below average >20 - Bad
pwr_ext	The voltage of the externalpower.	mV
reload_flag	Flag of the device reboot reason
scid1	SCID SIM-card №1
scid2	SCID SIM-card №2
work_type	Device working mode: 0 – base mode 1 – power saving mode 1 2 – power saving mode 2 3 – power saving mode 3 (deep sleep)
flag	Device status flag (bitwise parameter): bit1 - (SIM): 0 – work on SIM1, 1 – work on SIM2 bit2 - (GPS): 0 – work on an external GPS antenna, 1 – on internal bit3 - (GSM): 0 – work on an external GSM antenna, 1 – on internal bit4 - (Accelerometer): 1 – there is movement on the accelerometer, 0 – there is no movement bit5 - (Energy saving): 0 – normal mode, 1 – power saving mode bit6 - (Energy saving): 1 – sleep mode bit5 and bit6 - (Energy saving): 1 – deep sleep mode bit7 (Coordinates validity): 0 – valid, 1 – not valid
valid	Coordinates validity: 0 - valid 1 - not valid
fwere_base_vers	The base firmware version
relod_flag	Reboot reason flag
fwere_base_new	Base firmware version
fwere_curr_new	Current firmware version
acc_temp	Temperature in the device	°C
temp_gsm	GSM module temperature	°C
mcc	Mobile country code
mnc	Mobile network code
ta	Timing Advance
lac	Location area code
cell_id	Cell ID
rx_level	RX level

Parameter name

Description

Units

fwere_curr_vers

The current firmware version

fwere_flag

Flag of the firmware change result:
0 – manufacturer's firmware
1 – firmware changed by command from the server
2 – firmware changed by command from the device

gsm_level

CSQ - GSM level

hdop

HDOP:
1 - Perfect
2-3 - Great
4-6 - Good
7-8 - Medium
9-20 - Below average
>20 - Bad

pwr_ext

The voltage of the externalpower.

reload_flag

Flag of the device reboot reason

scid1

SCID SIM-card №1

scid2

SCID SIM-card №2

work_type

Device working mode:
0 – base mode
1 – power saving mode 1
2 – power saving mode 2
3 – power saving mode 3 (deep sleep)

flag

Device status flag (bitwise parameter):
bit1 - (SIM): 0 – work on SIM1, 1 – work on SIM2
bit2 - (GPS): 0 – work on an external GPS antenna, 1 – on internal
bit3 - (GSM): 0 – work on an external GSM antenna, 1 – on internal
bit4 - (Accelerometer): 1 – there is movement on the accelerometer, 0 – there is no movement
bit5 - (Energy saving): 0 – normal mode, 1 – power saving mode
bit6 - (Energy saving): 1 – sleep mode
bit5 and bit6 - (Energy saving): 1 – deep sleep mode
bit7 (Coordinates validity): 0 – valid, 1 – not valid

valid

Coordinates validity:
0 - valid
1 - not valid

fwere_base_vers

The base firmware version

relod_flag

Reboot reason flag

fwere_base_new

Base firmware version

fwere_curr_new

Current firmware version

acc_temp

Temperature in the device

°C

temp_gsm

GSM module temperature

°C

mcc

Mobile country code

mnc

Mobile network code

Timing Advance

lac

Location area code

cell_id

Cell ID

rx_level

RX level

Fill out a request form to get started with Wialon

Products

Niche products for addressing specific tasks

FindMe F3

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Become a partner

Request Wialon in your region

Fill out a request form to get started with Wialon