AOVX G-Series

AOVX G-Series
Manufacturer: AOVX
Forum Discussion

Number of units

1
Online
17
Total
Features AOVX G-Series:
  • 4G/LTE
  • Blackbox
  • BLE enabled
  • Wi-Fi positioning

The following data should also be added to AOVX G-Series unit properties section of Wialon GPS tracking software :

Device type: AOVX G-Series
Unique ID: custom

Specify the following parameters in configuration software or configuration AOVX G-Series for use in Wialon Hosting :

Server port: 22317

17 units of AOVX G-Series device type are connected to Wialon Data Center. This represents 0.02% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
param_id_# Parameter value
uart_msg_mode

UART message mode

uart_msg_datatype

UART message datatype 0=ASCII, 1=BIN

uart_msg_data

UART message data

alarm_flag

0,2,3,5,6,9-14,17-27,29,30: Reserved the default as 0

Bit 1: Overspeed alarm

Bit 4: GNSS fault

Bit 7: Device main power under voltage

Bit 8: Device main power off

Bit 15: Remove alarm

Bit 16: Vibration alarm

Bit 28: Illegal displacement of the vehicle

Bit 31: Reserved

state_flag

4-30: Reserved default is 0

Bit 0: 0-ACC off 1-ACC on

Bit 1: 0-GNSS position unfix 1-GNSS position fix

Bit 2: 0-north latitude 1-south latitude

Bit 3: 0-east longitude 1-west longitude

Bit 10: 0-fuel connect 1-fuel disconnect

Bit 30: 0-normal data 1-TOW data

Bit 31: 0-real time data 1-buffer data

odometer

Odometer

gsm

Mobile Network Signal Strength

pwr_ext

External supply voltage in mV

mV
fw_ver

Firmware version

bt_mac_#

Bluetooth MAC

bt_rssi_#

Bluetooth RSSI

bt_name_#

Bluetooth name

bt_fw_ver_#

Bluetooth firmware version

bt_volt_#

Bluetooth voltage

bt_temp_#

Bluetooth temperature

bt_hum_#

Bluetooth humidity

bt_sens_#

Bluetooth sensor (X,Y,Z)

wifi_mac_#

WIFI MAC

wifi_rssi_#

WIFI RSSI

gpio_ch_#

GPIO channel

gpio_st_#

GPIO status

data_type

Data type(0-63 is for GA series, 64-255 is for V series ):

G/A series:

0:periodic sampling 1:low battery trigger 2:motion trigger 3:crash trigger 4:light trigger 5:humi&temp trigger 6:temperature trigger 7:humidity trigger 8:clock trigger

light_#

Sensors information: light

temp_#

Sensors information: temperature

hum_#

Sensors information: humidity

accel_#

Sensors information: accelerometer

limit_#

Sensors information: Limit (Light,Tmax,Tmin,Hmax,Hmin)

pwr_int

Battery voltage(mV)

mV
charge_st

Charge status(optional): 1 byte

0: invalid

1: uncharged

2: charging

3: full charging

4: abnormal

battery_level

Battery level

%
work_mode

Work mode:1 byte

0: Periodic mode

1: Trigger mode

2: Tracking mode

3: Clock mode

4: Periodic mode+Trigger mode

5: Periodic mode+Tracking mode

6: Clock mode+Trigger mode

7: Tracking mode+Trigger mode

8: Periodic mode+Trigger mode+Tracking mode

imei

IMEI

iccid

ICCID

device_type

Device type

gnss_age GNSS position age
acc_on_dur

Duration of Acc on

hdop

HDOP

Models: GM100, GL100

AOVX G Series tracker devices are ideal for temperature and cold-chain tracking applications, where goods such as food, fruits, medicines or vaccines are to be monitored. G Series have integrated WIFI (for LBS indoor positioning) and BLE, enabling indoor location of the goods. Multiple cellular networks are supported for all our products: 2G, 4G Cat.1, NB-IoT and Cat.M1.

G Series trackers integrate multiple sensors such as temperature, humidity, light, movement detection and vibration, plus a rechargeable battery. Both indoor and outdoor positioning are supported by WIFI, LBS and dedicated multi-constellation GNSS. Short range wireless BLE [Bluetooth Low Energy] is flexible for easy configuration and to pair with external BLE sensors or accessories, allowing a G Series tracker to work as a BLE gateway.

Other applications cover people tracking, warehouse goods tracking and all applications where small size and indoor positioning is a must.

More devices from the manufacturer

Contact Gurtam and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone