Starlink GLONASS

Starlink GLONASS
Rating del usuario

(8 Votos)

Discusión en el foro

Cantidad de unidades

22
En línea
3449
Total

Para que el sistema de rastreo Wialon identifique los datos de Starlink GLONASS en el diálogo de configuración de la unidad, indique los siguientes datos:

Tipo de dispositivo: Starlink GLONASS
ID único: serial

Indique los siguientes parámetros en el programa de configuración o en la configuración Starlink GLONASS para utilizarlos en Wialon Hosting:

Dirección IP del servidor: 193.193.165.165
Puerto del servidor: 20581

En el centro de servicio Wialon se utilizan 3449 unidades Starlink GLONASS — es 0.71% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
alarm_armed Shows if alarm is armed. 0 - disarmed, 1 - armed
alarm_door Door state. 0 - closed, 1 - open
alarm_hood Hood state. 0 - closed, 1 - open
can_fuel_level CAN fuel level %
can_odometer CAN odometer value
can_rpm CAN engine revolutions per minute value r/min
can_speed CAN speed value km/h
can Value 1 shows that message contains CAN data
engine Engine. 0 - off, 1 - on
event_id Code of the event
ign Ignition state. 0 - off, 1 - on
immobilizer_armed Immobilizer state
in_port_e Input 3 / Port E value. 0 - off, 1 - on
in_port_f Input 4 / Port F value. 0 - off, 1 - on
odometer Odometer value m
out_port_b Output 2 / Port B value. 0 - off, 1 - on
pwr_ext Backup battery voltage V
pwr_int Vehicle battery voltage V
ref_num Message number
esafe_msg_type Message type from eSafe:
137 - Maneuver notification, will be transmitted as Drive rule occurred if enabled
143 - Accident notification, will be transmitted as Accident detected if enabled
144 - Drive status changed
145 - Too many events
146 - Bad installation
147 - Possible accident notification
esafe_maneuv_type The eSafe maneuver type:
1 - Acceleration
2 - Breaking
3 - Left turn
4 - Right turn
5 - Wide left turn
6 - Wide right turn
7 - Left turn while decelerating
8 - Left turn while accelerating
9 - Wide left turn while decelerating
10 - Wide left turn while accelerating
11 - Right turn while decelerating
12 - Right turn while accelerating
13 - Wide right turn while decelerating
14 - Wide right turn while accelerating
15 - Traffic circle
16 - Lane change
17 - Overtaking
18 - Speed bump
19 - Start of off-road driving
20 - End of off-road driving
esafe_maneuv_level The eSafe maneuver level:
1 - Low
2 - Medium
3 - High
esafe_maneuv_dur The eSafe maneuver duration ms
esafe_force_x The eSafe maximum g force detected in the X axis g
esafe_force_y The eSafe maximum g force detected in the Y axis g
esafe_force_z The eSafe maximum g force detected in the Z axis g
esafe_accident_direct The eSafe accident directions:
1 - Front
2 - Front left
3 - Front right
4 - Back
5 - Back left
6 - Back right
7 - Left
8 - Right
9 - Vehicle rolled over
esafe_driver_state The eSafe driver state:
0 - Normal
1 - Aggressive
2 - Dangerous
esafe_aggres_maneuvers The eSafe total number of aggressive maneuvers
esafe_danger_maneuvers The eSafe total number of dangerous maneuvers
esafe_num_maneuvers The eSafe total number of maneuvers

You can also download an example of object configuration file for Starlink GLONASS to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.

Otros dispositivos del fabricante