Features Teltonika FM2200:
- Built-in odometer
Supported in Wialon:
- ADC sensors
- CAN-bus support
- Driver identification
- Digital sensors
- SMS sending of data
- Remote management via SMS
- Communication via TCP
- Communication via UDP
The following data should also be added to Teltonika FM2200 unit properties section of Wialon GPS tracking software:
|Password to access the object:
||Configuration password to access the object
Specify the following parameters in configuration software or configuration Teltonika FM2200 for use in Wialon Hosting:
|Server IP Address:
7924 units of Teltonika FM2200 device type are connected to Wialon Data Center. This represents 1.59% of all AVL Hardware connected.
Below chart represents the dynamic of connections in the last 30 days:
You can also download an example of Teltonika FM2200 configuration file to connect it to Wialon GPS tracking software.
You can also download an example of object configuration file for Teltonika FM2200 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.
For communication via SMS, enter "login password" defined for the device and divided by the space in the "Device access password" field of the GPS unit in Wialon GPS tracking software.
To support «24 SMS in 1» mode, the interval between the points should be 900 seconds as it is on the server, i.e. the value should be 900000 ms in the device configuration.