Teltonika FM1100

Number of units

6792
Online
14054
Total
Features Teltonika FM1100:
  • Blackbox
  • Built-in odometer
Supported in Wialon:
  • ADC sensors
  • Driver identification
  • Digital sensors
  • LBS
  • SMS sending of data
  • Remote management via SMS
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Teltonika FM1100 unit properties section of Wialon GPS tracking software :

Device type: Teltonika FM1100
Unique ID: imei
Password to access the object: Configuration password to access the object

Specify the following parameters in configuration software or configuration Teltonika FM1100 for use in Wialon Hosting :

Server port: 20412

14054 units of Teltonika FM1100 device type are connected to Wialon Data Center. This represents 0.59% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
battery_charge Battery charge
canN CAN specific data (I/O property 145-154)
counter1 Fuel Counter (I/O property 76)
driver_code

Shows the moment of binding/unbinding a driver:
1 - binding
0 - unbinding

driver_status Garmin driver status
gsm GSM signal strength level 0 (lowest) – 5 (highest) (I/O property 21)
hdop Horizontal Dilution of Precision (I/O property 20 or 182)
last_driver_status Last Garmin driver status
paramN Value of special I/O property, where N - ID of property
pdop Position Dilution of Precision (I/O property 22)
priority

Message Priority:
0 - low
1 - high
2 - panic
3 - security

pwr_ext Power supply voltage (I/O property 66) V
pwr_int Battery voltage (I/O property 67) V
vdop Vertical Dilution of Precision (I/O property 21)

You can also download an example of unit configuration file for Teltonika FM1100 to be used in Wialon GPS tracking software. When creating a unit, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured unit with some sensors. Do not forget to specify the unique Id of your device.

Instruction on configuring Teltonika FM1100 via TCP.

I/O elements are additional source of information and are registered together with GPS data.

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone