Teltonika AT1000

Teltonika AT1000
Manufacturer: Teltonika
Forum Discussion
Discontinued

Number of units

0
Online
18
Total
Features Teltonika AT1000:
  • Blackbox
  • Built-in odometer
Supported in Wialon:
  • ADC sensors
  • CAN-bus support
  • Driver identification
  • Digital sensors
  • SMS sending of data
  • Remote management via SMS
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Teltonika AT1000 unit properties section of Wialon GPS tracking software :

Device type: Teltonika AT1000
Unique ID: imei
Password to access the object: Configuration password to access the object

Specify the following parameters in configuration software or configuration Teltonika AT1000 for use in Wialon Hosting :

Server port: 20225

18 units of Teltonika AT1000 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
battery_charge Battery charge
canN CAN specific data (I/O property 145-154)
counter1 Fuel Counter (I/O property 76)
driver_code

Shows the moment of binding/unbinding a driver:
1 - binding
0 - unbinding

driver_status Garmin driver status
gsm GSM signal strength level 0 (lowest) – 5 (highest) (I/O property 21)
hdop Horizontal Dilution of Precision (I/O property 20 or 182)
last_driver_status Last Garmin driver status
paramN Value of special I/O property, where N - ID of property
pdop Position Dilution of Precision (I/O property 22)
priority

Message Priority:
0 - low
1 - high
2 - panic
3 - security

pwr_ext Power supply voltage (I/O property 66) V
pwr_int Battery voltage (I/O property 67) V
vdop Vertical Dilution of Precision (I/O property 21)

You can also download an example of Teltonika AT1000 configuration file to connect it to Wialon GPS tracking software.

You can also download an example of object configuration file for Teltonika AT1000 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with sensors.

For communication via SMS, enter "login password" defined for the device and divided by the space in the "Device access password" field of the GPS unit in Wialon GPS tracking software.

To support «24 SMS in 1» mode, the interval between the points should be 900 seconds as it is on the server, i.e. the value should be 900000 ms in the device configuration.

I/O elements are additional source of information and are registered together with GPS data.

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone